PREMIUM URETHANE DUMBBELLS

ITEM LP8000

PREMIUM URETHANE DUMBBELLS

The Premium Polyurethane Dumbbell was produced according to the latest state of the production. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external impact, such as scratches or hits. The material of the pure polyurethane is liquid when heated and can be produced in every possible colour according to customer specifications. Polyurethane, also referred to as CPU, is absolutely odourless and more durable than a dumbbell with rubber coating.

Characteristics:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2,0 kg weight gradation from 2.0 – 50,0 kg.
» Weight difference with a tolerance of +/-1%.

Material:
» Handle: steel, hard chromed
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» Inner handle length: 145,0 mm
» Colour: black / blue

URETHANE DUMBBELLS

ITEM LP8002

URETHANE DUMBBELL

The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2,0 kg weight gradation from 2.0 – 50,0 kg.
» Weight variation with a tolerance of +/-1%.

Material: » Handle: Steel, hard chrome-plated.
» Weight block: steel with urethane coating

Dimensions:
» Handle diameter: 32,0 mm
» Inner handle dimension: 145,0 mm » Colour: black / blue

12-SIDED URETHANE DUMBBELLS

ITEM LP8003

12-SIDED URETHANE DUMBBELLS

The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features: The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2,0 kg weight gradation from 2.0 – 50,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with urethane coating
Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 145,0 mm

» Colour: black / blue

OCTAGONAL URETHANE DUMBBELLS

ITEM LP8004

OCTAGONAL URETHANE DUMBBELLS

The material of the dumbbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a dumbbell with a rubber coating. The octagonal design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 2,0 kg weight gradation from 2.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

» Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with urethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 145,0 mm
» Colour: black / blue

STUDIO DUMBBELLS

ITEM LP8070

STUDIO DUMBBELLS

Features:
» High quality studio dumbbell with vinyl coating.
» The design prevents it from rolling away, ideal for group training.
» The coating is floor-friendly, low-noise and washable.
» 1,0 kg weight gradation from 1.0 – 10,0 kg.
» Material: cast iron vinyl-coated » Colour: black

Item Weight Item Weight
LP8070-01 1,0 kg LP8070-06 6,0 kg
LP8070-02 2,0 kg LP8070-07 7,0 kg
LP8070-03 3,0 kg LP8070-08 8,0 kg
LP8070-04 4,0 kg LP8070-09 9,0 kg
LP8070-05 5,0 kg LP8070-10 10,0 kg

URETHANE STUDIO DUMBBELLS

ITEM LP8075

URETHANE STUDIO DUMBBELLS

The Polyurethane Studio Dumbbell was produced according to the latest production standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimum grip.
» 1,0 kg weight gradation from 1.0 – 10,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 145,0 mm
» Colour: black

Item Weight Item Weight
LP8075-01 1,0 kg LP8075-06 6,0 kg
LP8075-02 2,0 kg LP8075-07 7,0 kg
LP8075-03 3,0 kg LP8075-08 8,0 kg
LP8075-04 4,0 kg LP8075-09 9,0 kg
LP8075-05 5,0 kg LP8075-10 10,0 kg

PREMIUM URETHANE BARBELL

ITEM LP8010

URETHANE BARBELLS

The premium polyurethane straight barbell was produced according to the latest state of the art. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a barbell with a rubber coating.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
»Colour: black / blue

Item Weight
LP8010-10 10,0 kg
LP8010-15 15,0 kg
LP8010-20 20,0 kg
LP8010-25 25,0 kg
LP8010-30 30,0 kg

PREMIUM EZ CURL URETHANE BARBELL

ITEM LP8011

EZ CURL URETHANE BARBELLS

The premium polyurethane curved barbell was produced according to the latest state of the art. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a barbell with a rubber coating.

Features:

» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.
» Material: » Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: black / blue

Item Weight
LP8011-10 10,0 kg
LP8011-15 15,0 kg
LP8011-20 20,0 kg
LP8011-25 25,0 kg
LP8011-30 30,0 kg

12-SIDED URETHANE BARBELLS

ITEM LP8012

12-SIDED URETHANE BARBELLS

The material of the straight barbell with the urethane coating is a kind of relative of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: blackg

Item Weight
LP8012-10 10,0 kg
LP8012-15 15,0 kg
LP8012-20 20,0 kg
LP8012-25 25,0 kg
LP8012-30 30,0 kg

12-SIDED EZ CURL URETHANE BARBELL

ITEM LP8013

12-SIDED EZ CURL URETHANE BARBELL

The material of the curved barbell with the urethane coating is a kindred relation of pure polyurethane. Here a certain amount of plastic has been added. Both materials differ slightly in quality and specification, only the price makes the difference. The material of the urethane is very viscous when heated and can only be processed with enormous pressure. Every imaginable colour is possible according to customer specifications. This urethane, also called TPU, is absolutely odourless and more durable than a barbell with a rubber coating. The 12-cornered design is stylish and comfortable at the same time, because it prevents the barbell from rolling away on the floor.

Features:
» The weight blocks are welded to the handle.
» High-quality knurling for optimal grip.
» 5,0 kg weight gradation from 10.0 – 30,0 kg.
» Weight variation with a tolerance of +/-1%.

Material:
» Handle: Steel, hard chrome-plated.
» Weight block: steel with polyurethane coating

Dimensions:
» Handle diameter: 32,0 mm
» inner handle dimension: 870,0 mm
» Colour: black

Item Weight
LP8013-10 10,0 kg
LP8013-15 15,0 kg
LP8013-20 20,0 kg
LP8013-25 25,0 kg
LP8013-30 30,0 kg

PREMIUM URETHANE TRAINING PLATES WITH GRIP

ITEM LP8020

PREMIUM URETHANE TRAINING PLATES WITH GRIP

The premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» 3-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: steel with polyurethane coating
Colour: black / blue

Item weight Item weight
LP8020-1.25 1,25 kg LP8020-15 15, 0 kg
LP8020-2.5 2,5   kg LP8020-20 20,0 kg
LP8020-5 5,0   kg LP8020-25 25,0 kg
LP8020-10 10,0 kg

PREMIUM 12-EDGE URETHANE TRAINING PLATES WITH GRIP

ITEM LP8023

PREMIUM 12-EDGE URETHANE TRAINING PLATES WITH GRIP

The 12-cornered premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» 2-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: steel with polyurethane coating
Colour: black / blue

Item weight Item weight
LP8023-1.25 1,25 kg LP8023-15 15,0 kg
LP8023-2.5 2.5  kg LP8023-20 20,0 kg
LP8023-05 5.0  kg LP8023-25 25,0 kg
LP8023-10 10,0 kg

RUBBER BLACK BUMPER PLATE

ITEM LP8022

RUBBER BLACK BUMPER PLATE

The premium polyurethane Olympia weight plate was produced according to the latest manufacturing standards. The high quality pure polyurethane has an elasticity which is very insensitive and resistant to abrasion, chipping and any kind of external influences such as scratches or impacts. The material of the pure polyurethane is liquid when heated and can be produced in every imaginable colour according to customer specifications. Polyurethane, also called CPU, is absolutely odourless and more durable than a dumbbell with a rubber coating.

Features:
» 3-handle design for easy handling.
» 50.5 mm stainless steel ring.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in weight sizes 1.25 / 2.5 / 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: steel with polyurethane coating
Colour: black / blue

Item weight Item weight
LP8022-05 5.0  kg LP8022-20 20,0 kg
LP8022-10 10,0 kg LP8022-25 25,0 kg
LP8022-15 15,0 kg

URETHANE COMPETITION COLORED BUMPER PLATE

ITEM LP8021

URETHANE COMPETITION COLORED BUMPER PLATE

The Competition Bumper Plate Polyurethane was produced according to the latest state of the art. The design of the discs is a perfect basis for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are designed for this kind of training due to their optimal elasticity. The inner ring allows a fast and safe loading and unloading of the discs on any Olympia barbell.

Features:
» Chrome-plated inner ring with a 50.5 mm socket.
» Non-slip silk-matt surface with high-end finish.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in the weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: Polyurethane, CPU
Colour: Colour coded

Item weight Item weight
LP8023-1.25 1,25 kg LP8023-15 15,0 kg
LP8023-2.5 2,5  kg LP8023-20 20,0 kg
LP8023-05 5,0  kg LP8023-25 25,0 kg
LP8023-10 10,0 kg

URETHANE DOUBLE COLORED ELITE BUMPER PLATE

ITEM LP8027

URETHANE DOUBLE COLORED ELITE BUMPER PLATE

The Elite Bumper Plate Polyurethane has been produced to the latest manufacturing standards. Due to its unique design it impresses with an optimal handling during training. The design of the discs is a perfect basis for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are designed for this kind of training due to their optimal elasticity. The inner ring allows a fast and safe loading and unloading of the discs on any Olympia barbell.

Features:
» Chrome-plated inner ring with a 50.5 mm socket.
» Non-slip silk-matt surface with high-end finish.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in the weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: Polyurethane, CPU
Colour: black / colour coded

Item color weight Item color weight
LP8027-05 5.0   kg LP8027-20 20,0 kg
LP8027-10 black-yellow 10,0 kg LP8027-25 25,0  kg
LP8027-15 15,0 kg

URETHANE CHANGE PLATE

ITEM LP8028

URETHANE CHANGE PLATE

The Fractional Weight Plates are the optimal addition to the Competition Bumper Plate of any kind to ensure the fine gradation below 5,0 kg. They are mainly used for power lifting, weight lifting and cross training. The inner ring allows a fast and safe loading and unloading of the plates on any Olympia barbell.

Features:
» Inner ring with a 50.5 mm socket.
» Silk matt surface with high-end finish.
» Weight deviation with a tolerance of +/-1%.
» Available in the weight sizes 0.5 / 1.0 / 1.5 / 2.0 / 2.5 and 5,0 kg.

Material: Polyurethane, CPU
Colour: Colour coded

Item color weight Item color weight
LP8028-0.5 0.5 kg LP8028-02 blue 2,0 kg
LP8028-01 green 1,0 kg LP8028-2.5 red 2.5 kg
LP8028-1.5 yellow 1.5 kg LP8028-5 5,0 kg

BLACK HIGH ELASTICITY BUMPER PLATE

ITEM LP8026

BLACK HIGH ELASTICITY BUMPER PLATE

The Rubber Granule Bumper Plate has a flanged inner ring made of stainless steel, which allows a fast and safe loading and unloading of the discs on any Olympia barbell. Due to the full rubber coating of the weight plate and a Shore A hardness of 90, every surface is perfectly protected against impact.

Features:
» Chrome-plated inner stable ring with a 50.5 mm socket.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 20.000 impact repetitions.
» Available in weight sizes 5.0 / 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: 100% natural rubber
Colour: black / colour coded

Item color weight
LP8026-05 white-black 5.0 kg
LP8026-10 10,0 kg
LP8026-15 bright-yellow-black 15.0  kg
LP8026-20 blue-black 20,0 kg
LP8026-25 shiny-red-black 25.0  kg

RUBBER BLACK COMPETITION BUMPER PLATE

ITEM LP8025

RUBBER BLACK COMPETITION BUMPER PLATE

The black Competition Bumper Plate rubber is designed for powerlifting, weight lifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are perfect for this kind of training due to their optimal impact properties. The chrome-plated central steel disc allows a fast and safe loading and unloading of the discs on any Olympia barbell.

Features:
» Chrome-plated steel plate with a 50.5 mm receptacle.
» Silk matt surface with high-end finish.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in weight sizes 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: 100% natural rubber
Colour: black / colour coded

Item color weight
LP8025-10 green 10,0 kg
LP8025-15 yellow 15.0  kg
LP8025-20 blue 20,0 kg
LP8025-25 red 25,0 kg

RUBBER COLORED COMPETITION BUMPER PLATE

ITEM LP8024B

RUBBER COLORED COMPETITION BUMPER PLATE

The colored Competition Bumper Plate rubber is designed for powerlifting, weightlifting and cross training. Dropping from overhead or shoulder height is no problem, the discs are perfect for this kind of training due to their optimal impact properties. The chrome-plated central steel disc allows a fast and safe loading and unloading of the discs on any Olympia barbell.

Features:
» Chrome-plated steel plate with a 50.5 mm receptacle.
» Silk matt surface with high-end finish.
» Each weight size has a diameter of 450,0 mm according to IWF standard.
» Weight deviation with a tolerance of +/-1%.
» Tested with 30.000 impact repetitions.
» Available in weight sizes 10.0 / 15.0 / 20.0 and 25,0 kg.

Material: 100% natural rubber
Colour: Colour coded

Item color weight
LP8024B-10 green 10,0 kg
LP8024B-15 yellow 15.0  kg
LP8024B-20 blue 20,0 kg
LP8024B-25 red 25,0 kg

MEN‘S COMPETITION WEIGHTLIFTING  BAR

ITEM LP8050

MEN‘S COMPETITION WEIGHTLIFTING BAR

Features:
» Material: Spring steel – 60Si2Mn
» Medium knurling with good grip.
» Weight distributed over 10 needle bearings and 2 bushings.
» Tensile strength measured at 190.000 PSI.
» Capable of withstanding a load of 680,0 kg.

Dimensions:
» Length: 220,0 cm.
» Recording length: 41,0 cm
» Handle diameter of 28,0 mm.

Weight: 20,0 kg
Colour:
» Recording: Black
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8050 20,0 kg 60Si2Mn 28,0 mm 220,0 cm 41,0 cm IWF 1.2mm 190k PSI 1500LBS Needle bearing x 10, Bushing x 2

WOMEN‘S COMPETITION WEIGHTLIFTING  BAR

ITEM LP8051

WOMEN‘S COMPETITION WEIGHTLIFTING BAR

Features:
» Material: alloy steel – CrMo
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 170.000 PSI.
» Capable of withstanding a load of 450,0 kg.

Dimensions:
» Length: 201,0 cm.
» Recording length: 32,0 cm
» Handle diameter of 25,0 mm.

Weight: 15,0 kg
Color:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8051 15,0 kg CrMo 25,0 mm 201,0 cm 32,0 cm IWF 1.2mm 170k PSI 1500LBS Needle bearing x 4, Bushing x 2

MEN‘S COMPETITION POWERLIFTING BAR

ITEM LP8080

MEN‘S COMPETITION POWERLIFTING BAR

Features:
» Material: Spring steel – 60SI2Mn
» Medium knurling with good grip.
» Weight distributed over 10 needle bearings and 2 bushings.
» Tensile strength measured at 240.000 PSI.
» Can support up to 900,0 kg.

Dimensions:
» Length: 220,0 cm.
» Recording length: 41.5 cm
»Handle diameter of 29,0 mm.

Weight: 20,0 kg
Colour:
» Recording: Chrome
» Handle: Black

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8080 20,0 kg 60Si2Mn 29,0 mm 220,0 cm 41.5 cm IWF 1.2mm 240k PSI 2000LBS Needle bearing x 10, Bushing x 2

MEN‘S ELITE WEIGHTLIFTING BAR

ITEM LP8052

MEN‘S ELITE WEIGHTLIFTING BAR

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 140.000 PSI.
» Capable of supporting up to 300,0 kg.

Dimensions:
» Length: 220,0 cm.
» Recording length: 41,0 cm
» Handle diameter of 28,0 mm.

Weight: 20,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8052 20,0 kg 45# 28,0 mm 220,0 cm 41,0 cm Dual kunrling 1.2mm 140k PSI 700LBS Needle bearing x 4, Bushing x 2

MEN‘S CERAKOTE TRAINING BAR

ITEM LP8085

MEN‘S CERAKOTE TRAINING BAR

Features:
» Material: alloyed steel – 40Cr
» Medium knurling with good grip.
» Weight distributed over 8 needle bearings and 2 bushings.
» Tensile strength measured at 160.000 PSI.
» Capable of withstanding a load of 450,0 kg.

Dimensions:
» Length: 220,0 cm.
» Recording length: 41.5 cm
» Handle diameter of 28,0 mm.

Weight: 20,0 kg
Colour:
» Recording: Ceramic Black
» Handle: ceramic grey / blue / red

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8085 20,0 kg 40Cr 28,0 mm 220,0 cm 41.5 cm IWF 1.2mm 160k PSI 1000LBS Needle bearingx8 Bushingx2

WOMEN‘S CERAKOTE TRAINING BAR

ITEM LP8086

WOMEN'S CERAKOTE TRAINING BAR

Features:
» Material: alloyed steel – 42CrMo
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings and 2 bushings.
» Tensile strength measured at 170.000 PSI.
» Capable of supporting up to 350,0 kg.

Dimensions:
» Length: 201,0 cm.
» Recording length: 32.5 cm
» Handle diameter of 25,0 mm.

Weight: 15,0 kg
Colour:
» Recording: Ceramic Black
» Handle: Ceramic purple / yellow / pink

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8086 15,0 kg 42CrMo 25,0 mm 201,0 cm 32.5 cm IWF 1.2mm 170k PSI 700LBS Needle bearingx4 Bushingx2

5’OLYMPIC WEIGHTLIFTING BAR

ITEM LP8082

5'OLYMPIC WEIGHTLIFTING BAR

» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 140.000 PSI.
» Can support a load of up to 250,0 kg.

Dimensions:
» Length: 150,0 cm.
» Recording length: 25,0 cm
» Handle diameter of 28,0 mm.

Weight: 13.5 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8082 13.5 kg 45# 28,0 mm 150,0 cm 25,0 cm Dual kunrling 1.2mm 140k PSI 600LBS Needle bearing x 2, Bushing x 2

5LB JUNIOR TECHNIQUE BAR

ITEM LP8083

5LB JUNIOR TECHNIQUE BAR

Features:
» Material: Aluminium
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings.
» Tensile strength measured at 42.000 PSI.
» Can support up to 20,0 kg.

Dimensions.:
» Length: 130,0 cm.
» Recording length: 10.5 cm
» Handle diameter of 22.2 mm.

Weight: 2.5 kg
Colour:
» Recording: Blue
» Handle: Black

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8083 2.5 kg Alumimum 22.2mm 130,0 cm 10.5 cm 1.0mm 42k PSI 40LBS Ball Bearing x 2

4’OLYMPIC WEIGHTLIFTING BAR

ITEM LP8054

4'OLYMPIC WEIGHTLIFTING BAR

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 200,0 kg.

Dimensions:
» Length: 120,0 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 10,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8054 10,0 kg A3 28,0 mm 120,0 cm 17,0 cm Dual kunrling 1.2mm 110k PSI 500 LBS Bushing x 2 Bearing x 2

4′ OLYMPIC EZ-CURL BAR

ITEM LP8053

4' OLYMPIC EZ-CURL BAR

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Tensile strength measured at 110.000 PSI.
» Can support up to 250,0 kg.

Dimensions:
» Length: 120,0 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 10,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8053 10,0 kg A3 28.0  mm 120,0 cm 17,0 cm 1.2 mm 110K PSI 500LBS Bushing x 2, Bearing x 2

LOADABLE DUMBBELLS

ITEM LP8084

LOADABLE DUMBBELLS

Features:
» Material: High carbon steel
» Medium knurling with good grip.
» Weight distributed over 4 needle bearings.
» Tensile strength measured at 110.000 PSI.
» Capable of supporting up to 250,0 kg.

Dimensions:
» Length: 51.5 cm.
» Recording length: 17,0 cm
» Handle diameter of 28,0 mm.

Weight: 5.8 kg
Colour:
» Recording: Chrome
» Handle: Chrome

Item Weight Material Shaft
diameter
Length Loadable
Sleeve Length
Knurl Tensile
Strength
Tested Sleeve Rotation
LP8084 5.8 kg A3 28,0 mm 51.5 cm 17,0 cm 1.2mm 110k PSI 500 LBS Needle bearing x 4

SAFTY SQUAT BAR

ITEM LP8055

SAFTY SQUAT BAR

This barbell is a safer option for intensive knee bends or maximum load lifting. Increase your maximum working weight compared to conventional squats. 3 cushion pads distribute the pressure evenly over the shoulders. The 2 handles in front of the barbell also relieve the shoulder joints when completing the exercise.

Features:
» Material: hard steel
» Medium knurling with good grip.
» Weight distributed over 4 ball bearings and 2 bushings.
» Can support up to 250,0 kg

Dimensions:
» Length: 220,0 cm.
» Recording length: 30,0 cm
» Handle diameter of 30,0 mm.

Weight: approx. 20,0 kg
Colour:
» Recording: Chrome
» Handle: Chrome

HEX BAR

ITEM LP8056

HEX BAR

The Hexbar is designed for shrugs, dead lifting, squats etc. and should be part of every Functional or Strongman Training. The Hexbar also provides beginners or rehab athletes with the possibility to concentrate on the movement of the exercises without stressing the lower back too much.

Characteristics:
» Material: hard steel with powder coating
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 200,0 kg.

Dimensions:
» Length: 226,0 cm.
» Sleeve length: 41,0 cm
» Handle width approx. 64,0 cm.

Weight: 13,0 kg
Colour: black

TRICEP BAR

ITEM LP8059

TRICEP BAR

The bar is a solide triceps barbell made of steel with olympic weight plate support with neutral grips (the palms of the hands are facing each other), which can be used for training the triceps, biceps and the lower arms.

Characteristics:
» Material: hard steel chromed
» Medium knurling with good grip.
» Weight distribution on 2 ball bearings and 2 bushings.
» Can support up to 100,0 kg.

Dimensions:
» Length: 86,0 cm.
» Sleeve length: 17,0 cm
» Handle diameter: 25,0 mm.

Weight: 10.6 kg
Colour: silver

MULTI-GRIP BAR

ITEM LP8301

MULTI-GRIP BAR

The newly designed, fully welded bar is one of the few multi-handle barbells in the industry with knurled handles. This versatile barbell is a must for powerlifters and other athletes who want to train a neutral grip for increased explosive power or reduce the strain on the shoulders.

Characteristics:
» Material: profile steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 250,0 kg.

Dimensions:
» Length: 200,0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 30,0 mm.

Weight: 15,0 kg
Colour: black / silver

LOG BAR

ITEM LP8302

LOG BAR

Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350,0 kg.

Dimensions:
» Length: 190,0 cm.
» Sleeve length: 31.5 cm
» Handle diameter: 40,0 mm.

Weight: 40,0 kg
Colour: black / silver

HEX BAR PRO

ITEM LP8300

HEX BAR PRO

The Hexbar PRO is designed for shrugs, cross lifting, knee bends etc. and should be part of every functional or strongman training. The Hexbar provides 3 grip sizes, 30.0 / 40.0 and 50,0 mm in diameter.

Characteristics:
» Material: steel with powder coating, sleeve chromed
» Medium knurling with good grip.
» Fully welded design.
» Loadable up to 350,0 kg.

Dimensions:
» Length: 90,0 cm.
» Sleeve length: 31.5 cm
» Handle distance: 78,0 cm

Weight: 18,0 kg
Colour: black / silver

WEIGHTLIFTING PLATFORM

ITEM LP8813-S1

WEIGHTLIFTING PLATFORM

The dropping platform is designed for heavy powerlifting and weight training. Whether in competitive sports or clubs, even in the studio and cross training boxes, the platform is indispensable. A centrally positioned wooden plate offers a safe stand and the two lateral rubber tiles offer a very good impact and noise protection. All elements are held together by a solid steel frame. Due to its high dead weight, the platform can be used anywhere and is non-slip without fixing.

Characteristics:
» Material: sectional steel powder-coated, rubber mats, wood
» Loadable up to 500,0 kg.

Dimensions:
» Platform: » Wooden plate: » Rubber plates:
» Length: 240,0 cm 180,0 cm 180,0 cm
» Width: 180,0 cm 120,0 cm 60,0 cm
» Height: 3,0 cm 3,0 cm 3,0 cm

» Weight: 18,0 kg
» Colour: rubber tile-black / wood-brown / frame-black
» Delivery takes place in disassembled condition.
» Assembly required.

WEIGHTLIFTING BELT

ITEM LP8067

WEIGHTLIFTING BELT

The leather training belt stabilizes the torso muscles during heavy dead lifts or squats. It supports a safe training without overstraining the important support muscles.

Characteristics:
» Material: leather
» Size: S, M, L, XL
» Colour: black

WOODEN JERK BLOCK SET

ITEM LP8816

WOODEN JERK BLOCK SET

The LIVEPRO Jerk Blocks support the athlete in learning and improving the Clean and Jerk. The blocks can also be used for increased deadlifts, step-ups or box jumps. The 4 different heights of the blocks allow to store the training weight in 8 different heights. The block with the lowest height should always be used as the top block.
Made of 20 mm structural plywood they are able to withstand heavy loads. Each level has its own set of roller blocks at each end, so dropping the barbell safely is no problem, it will not roll.

Characteristics:
» Material: Wood
» Can support a load of 500,0 kg.

Dimensions:
» Base dimensions: 91.5 x 51,0 cm.
» Block heights: 38.0 / 30.0 / 15.0 and 6,0 cm
» Material thickness: 20,0 mm

Weight: 160,0 kg
Colour: brown

DIP BELT

ITEM LP8095

DIP BELT

The Dip Belt allows additional weights in the form of weight plates or dumbbells for a more intensive training weight during chin-ups, dips, etc. and thus give the muscle an improved training impulse for muscle growth.

Characteristics:
» Material: leather / nylon / steel chain
» Loadable up to 75,0 kg.
» Colour: black

DELUXE MULTI-EXERCISER

ITEM LP8192A

DELUXE MULTI-EXERCISER

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38,0 cm.
» Colour: chrome / black

DELUXE REVOLVING V-BAR

ITEM LP8192B

DELUXE REVOLVING V-BAR

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for biceps and triceps training on the cable tower.
» Handle width approx. 44,0 cm.
» Colour: chrome / black

TRICEP ROPE

ITEM LP8192C

TRICEP ROPE

Characteristics:
» Material: Nylon
» Rotating joint and rubber ends.
» Suitable for biceps and triceps training on the cable tower.
» Dimensions:
» Length: approx. 70,0 cm
» Rope diameter: approx. 3,0 cm
» Colour: black

SINGLE HANDLE

ITEM LP8192D

CABLE HANDLE

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38,0 cm.
» Colour: chrome / black

PRO LAT BAR

ITEM LP8192E

PRO LAT BAR

Characteristics:
» Solid steel with rotating joint.
» Pressed on non-slip PU-covers.
» 2 handle variations allow back training on the cable tower.
» Dimensions:
» Length: 67,0 cm.
» Handle width: 14,0 cm
» Colour: chrome / black

ANGLED BICEPS/TRICEPS BAR

ITEM LP8192F

ANGLED BICEPS/TRICEPS BAR

Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» 2 handle variations allow versatile training exercises on the cable tower.
» length: 60,0 cm
» Colour: chrome / black

ROWING HANDLE

ITEM LP8192G

ROWING HANDLE

Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» The grip variant allows tight rowing on the cable tower.
» Handle width: 14,0 cm
» Colour: chrome / black

TRICEPS STRAIGHT BAR

ITEM LP8192H

TRICEPS STRAIGHT BAR
Characteristics:
» Solid steel with rotating joint and pressed-on non-slip PU covers.
» The handle is suitable for biceps and triceps training on the cable tower.
» Length: 50,0 cm
» Colour: chrome / black

TRICEPS V-BAR

ITEM LP8192I

TRICEPS V-BAR
Characteristics:
» Solid steel with pressed-on non-slip PU-coatings.
» The handle is suitable for biceps and triceps training on the cable tower.
» Width: 35,0 cm
» Colour: chrome / black

STRAP HANDLE PRO

ITEM LP8192J

STRAP HANDLE PRO
Characteristics:
» Break-proof plastic handle with foam cover.
» Multi-stitched nylon loop with metal ring.
» The one-hand grip is suitable for variable training on the cable tower.
» Handle width: 13,0 cm
» Loadable up to 60,0 kg
» Colour: black

BARBELL COLLARS

ITEM LP8061

BARBELL COLLARS
Characteristics:
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 80,0 mm.
» Colour: black

BARBELL COLLARS

ITEM LP8062

BARBELL COLLARS
Characteristics:
» Can be used with any Olympic bar with 50 mm attachment.
» Rubber inlay protects the bar from damage and provides a secure grip.
» Fastener made of break-proof plastic with locking clamp mechanism.
» Hexagonal design with an outer dimension of 70,0 mm.
» Colour: black / Blue

10 PAIRS DUMBBELL RACK

ITEM LP8809

10 PAIRS DUMBBELL RACK

The 10-pair dumbbell rack keeps your free weight range organized and clean, resulting in a more comfortable training experience. The vertical storage makes it possible to use a minimum of space compared to conventional horizontal dumbbell racks.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 70,0 cm
» Width: 60,0 cm
» Height: 150,0 cm
» Weight: 35,0 kg
» Colour: black
» Assemply required.
» Delivery follows without dumbbels.

OLYMPIC PLATE TREE

ITEM LP8850

OLYMPIC PLATE TREE

Solid weight plate rack for all standard weight plates with a support of 50,0 mm. Integrated rubber feet protect the base from damage and slipping. The tripod design gives a secure stand. The nylon rings on the holders ensure that the weight plates can be safely placed on the rack.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 80,0 cm
» Width: 60,0 cm
» Height: 130,0 cm
» Weight: 30,0 kg
» Colour: black
» Assemply required.

OLYMPIC BAR HOLDER

ITEM LP8852

OLYMPIC BAR HOLDER

This free standing barbell rack allows to store 5 barbells horizontally and 3 barbells vertically. It is not only established in cross boxes, but is also perfect for commercial gyms, schools and universities. – Keep your training area safe, clean and organized

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 60,0 cm
» Width: 50,0 cm
» Height: 120,0 cm
» Weight: 35,0 kg
» Colour: black
» Assembly required.

OLYMPIC PLATE TREE AND BAR RACK

ITEM LP8851

OLYMPIC PLATE TREE AND BAR RACK

This freestanding storage unit allows you to store various dumbbell slides on 6 holders and barbells vertically on 4 upright sleeves. Wide, solid steel base plates are covered with high density rubber to distribute the load.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 70,0 cm
» Width: 50,0 cm
» Height: 130,0 cm
» Weight: 25,0 kg
» Loadable up to 400,0 kg.
» Colour: black
» Assembly required.

9 OLYMPIC BAR FLOOR STAND

ITEM LP8874

9 OLYMPIC BAR FLOOR STAND

This extremely space-saving storage system allows 9 barbells to be stored vertically in the upright sleeves. The plastic protection on the sleeves prevents the barbell from being damaged by scratching.

Characteristics:
» Material: sheet steel and tube with powder coating
» Dimensions:
» Length: 50,0 cm
» Width: 50,0 cm
» Height: 25,0 cm
» Weight: 20,0 kg
» Colour: black

BARBELL RACK

ITEM LP8853

BARBELL RACK

The solid storage allows 10 commissioned barbells to be stored horizontally. The plastic covered holders prevent scratching when loading and unloading the barbells. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 94.1 cm
» Width: 84.6 cm
» Height: 121.8 cm
» Weight: 56.5 kg
» Colour: black
» Assembly required.

5 PAIRS DUMBBELL RACK

ITEM LP8856

5 PAIRS DUMBBELL RACK

This stylish dumbbell rack can support 5 pairs of commissioned dumbbells horizontally. The designed plastic saddles provide appropriate storage and safe loading and unloading of the rack. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 122.6 cm
» Width: 80.4 cm
» Height: 82.8 cm
» Weight: 53.8 kg
» Colour: black
» Assembly required.

10 PAIRS DUMBBELL RACK

ITEM LP8855

10 PAIRS DUMBBELL RACK

This stylish dumbbell rack can store 10 pairs of picked dumbbells horizontally. The designed plastic saddles provide appropriate storage and safe loading and unloading of the rack. The round feet with rubber cover guarantee a safe stand and protection of the floor. The plastic end caps on the construction tubes give the rack a high-end finish.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 239.1 cm
» Width: 80.4 cm
» Height: 82.8 cm
» Weight: 82,0 kg
» Colour: black
» Assembly required.

3 TIER DUMBBELL RACK

ITEM LP8866

3 TIER DUMBBELL RACK

This space-saving dumbbell rack can support 15 pairs of commissioned dumbbells horizontally. The saddles prevent the dumbbells from unrolling and keep them in order at any time. The round feet with rubber cover guarantee a safe stand and protection of the floor.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 224.7 cm
» Width: 74,0 cm
» Height: 100,0 cm
» Weight: 85,0 kg
» Colour: black
» Assembly required.

2 TIER DUMBBELL RACK

ITEM LP8800

2 TIER DUMBBELL RACK

This dumbbell rack supports 10 pairs of commissioned dumbbells horizontally on 2 levels. The saddles prevent the dumbbells from unrolling and keep them in order at any time. The stable construction and the rubber feet offer a safe stand and protection of the floor.

Features:
» Material: steel tube with powder coating
» Dimensions:
» Length: 245,0 cm
» Width: 73.5 cm
» Height: 79,0 cm
» Weight: 57,0 kg
» Colour: black
» Assemply required.
» Delivery follows without dumbbels.

3 TIER DUMBBELL RACK

ITEM LP8860

3 TIER DUMBBELL RACK

This 2-sided vertical dumbbell rack is able to store 10 pairs of commissioned dumbbells from 1.0 – 10,0 kg in a minimalist space. The plastic protectors on the holders protect the dumbbells from damage and the painting of the rack. The chromed end cap on the construction tube gives the stand a high-end finish and the square base guarantees a secure stand.

Characteristics:
» Material: Steel with powder coating
» Dimensions:
» Length: 49,0 cm
» Width: 49,0 cm
» Height: 132,0 cm
» Weight: 35,0 kg
» Colour: black
» Assembly required.

2 TIER DUMBBELL RACK

ITEM LP8810

2 TIER DUMBBELL RACK

The mobile plate rack is the optimal solution for storing of Competition Bumper Plates or similar. It can be positioned freely in the room with the help of the handle at any time, even when loaded. Its use is especially suitable for the orderly storage of weight plates near a weight lifting platform.

Features:
» Material: steel tube with powder coating
» Dimensions:
» Length: 127,0 cm
» Width: 48,0 cm
» Height: 33,0 cm
» Weight: 20,0 kg
» Colour: black
» Assemply required.

OLYMPIC WEIGHT TREE

ITEM LP8804

OLYMPIC WEIGHT TREE

Solid weight plate rack for all standard weight plates with a support of 50,0 mm. Integrated rubber feet protect the base from damage and slipping. The tripod design gives a secure stand. The nylon rings on the holders ensure that the weight plates can be safely placed on the rack.

Characteristics:
» Material: steel tube with powder coating
» Dimensions:
» Length: 74.5 cm
» Width: 85.5 cm
» Height: 98,0 cm
» Weight: 14.5 kg
» Colour: black
» Assemply required.
» Delivery follows without weight plates.

BARBELL RACK

ITEM LP8807

BARBELL RACK

This solid storage system allows 10 commissioned barbells to be stored horizontally. The upright oval construction tube is continuous and curved, so that it stands out visually as a stylish highlight in your studio. The feet with rubber cover offer a safe stand and protection of the floor.

Characteristics:
» Material: Steel tube with powder coating
» Dimensions:
» Length: 93,0 cm
» Width: 76,0 cm
» Height: 137,0 cm
» Weight: 37,0 kg
» Colour: black
» Assembly required.
» Delivery follows without barbells.

WALL MOUNTED BAR RACK

ITEM LP8812

WALL MOUNTED BAR RACK
This space-saving storage allows 6 commercial bars to be stored horizontally on the wall. The two elements can be mounted in any individual distance, so that even shorter barbells with small internal dimensions can bestored. A plastic track protects the surface coating and knurling of the bar.
Characteristics:
» Material: sheet steel with powder coating
vDimensions:
» Length: 98,0 cm
» Width: 12.5 cm
» Height: 5,0 cm
» Weight: 9.5 kg
» Colour: black
» Wall mounting required.
» Delivery follows without barbells.

OLYMPIC BAR HOLDER

ITEM LP8808

OLYMPIC BAR HOLDER
This extremely space-saving storage allows 8 barbells to be stored vertically in the upright sleeves. The plastic protection on the sleeves prevents the barbell from being damaged by scratching.

Characteristics:
» Material: sheet steel / steel tube with powder coating
» Dimensions:
» Diameter: 49,0 cm
» Height: 20,0 cm
» Weight: 19,0 kg
» Colour: black
» Delivery follows without barbells.

FOLDING WALL RACK

ITEM LP8890

FOLDING WALL RACK
This squat rack is the perfect solution for small rooms with little space. After training, it can be folded down to a minimum depth of 15.5 cm from the wall to the wall. BOOM! Included in the delivery are two hooks, two safety bars and a pull-up bar. The uprights are equipped with plastic end caps on the underside to protect the floor.

Characteristics:
» Material: square steel / sheet steel with powder coating
» Dimensions:
» Width: 150,0 cm
» Depth: 115,0 cm
» Height: 231,0 cm
» Weight: 68,0 kg
» Colour: black
» Delivery follows without bar and weight plates.

SETS BARBELL WALL RACK

ITEM LP8894

SETS BARBELL WALL RACK
This wall-mounted solution is space-saving and perfect for storing of Olympia weight plates and Olympia bars. The strategically located plate holders allow even bumper plates with identical outer diameters to be sorted away properly, which is ideal for cross boxing and weight lifting platforms positioned close to the wall. Three bars of different lengths can be stored in the tubes configured with plastic sleeves. The protective sleeves prevent the barbell coating from being scratched.

Characteristics:
» Material: square steel / steel tube with powder coating
» Dimensions:
» Width: 100,0 cm
» Depth: 40,0 cm
» Height: 181,0 cm
» Weight: 28,0 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without bars and weight plates.

VERTICAL BARBELL RACK

ITEM LP8891

VERTICAL BARBELL RACK
This space-saving storage allows 3 standard barbells to be stored upright at the wall. The two elements can be mounted at any individual distance, so that even shorter barbells with small internal dimensions can be stored. A plastic track protects the surface of the bar.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 32,0 cm
» Depth: 8.7 cm
» Height: 10.6 cm
» Weight: 6.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery without bars.

PLATE WALL RACK

ITEM LP8895

PLATE WALL RACK
This robust wall mount allows it to store 4 x 25,0 kg Olympia weight plates in a space-saving way. The mounting height is freely selectable and thus offers the comfort to remove or load the weight plates at a convenient height.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 36.8 cm
» Depth: 25.5 cm
» Height: 51.7 cm
» Weight: 5.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without weight plates.

PLATE WALL RACK

ITEM LP8893

PLATE WALL RACK
The 3 mandrels at equal intervals allow Olympia and Bumper weight plates to be stored on the wall to save space. The holder can be attached to the wall vertically, horizontally and diagonally as desired. The mounting height is freely selectable and thus offers the comfort of removing or loading the weight plates at a comfortable height. Rubber stoppers prevent the weight plates from coming into contact with the wall.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 120,0 cm
» Depth: 24.7 cm
» Height: 6.4 cm
» Weight: 9,0 kg
» Colour: black
» Wall mounting required.
» Delivery follows without weight plates.