LIFTING WRIST WRAPS

ITEM LP8090

  • LP8090-1
  • LP8090 (1)
  • LP8090 (2)
  • LP8090 (3)

The LIVEPRO Weight Lifting Bandage relieves and stabilizes the wrists at the same time when the load is too high during the exercises. The material is extremely robust and durable. Due to a percentage of rubber, it gives the bandage flexibility and can be adapted to any situation. The tighter the more stable.

Characteristics:
Material: 65% polyester / 35% rubber
» Dimensions:
» Length: 33,0 cm
» Width: 8,0 cm
» Colour: black/blue/grey
» Will be delivered as a pair.

LIFTING STRAPS

ITEM LP8092

  • LP8092-1

The LIVEPRO weightlifter pulling assistant will support your weight gains during training. With it you can dare to optimize your training, so that your strength tends clearly upwards in the long run. They support you to train with more weight or repetitions, to increase the intensity of your workout and to get the best out of your potential. Whether squats, deadlifts, chin-ups with additional weight etc., they are flexible in use. The material is extremely robust and durable.

Characteristics:
Material: 90% polyester / 10% neoprene
Dimensions:
» Length: 56,0 cm
» Width: 3,8 cm
» Colour: black
» Will be delivered as a pair.

BLOOD FLOW RESTRICTION BANDS

ITEM LP8096

  • LP8096-1

The LIVEPRO support relieves and stabilizes the wrists at the same time when they are under too much pressure while doing the exercises. The material is extremely robust and durable. Due to a percentage of rubber it gives the bandage flexibility and can be adapted to every situation. The tighter the more stable.

Characteristics:
Material: 65% polyester, 35% rubber
Dimensions:
» Length: 66,0 cm
» Width: 5,0 cm
» Colour: black/blue
» Will be delivered as a pair.

GYM CHALK

ITEM LP8190

  • LP8190-1

The LIVEPRO Magnesium Ball contains a powder to support the grip when climbing and for the ultimate own weight training during the Street Workout. Even in the Crossfit boxes it has been used for various exercises. The powder keeps the hands dry and thus reduces slipping on the training equipment and training with the accessories.

Features:
Material: 100% magnesium carbonate powder
» Colour: white

FITNESS GLOVES

ITEM LP8260

  • LP8260-1

The LIVEPRO glove has a durable stretch insert over the back of the hand and between the fingers that increases flexibility, fit and breathability. The perfect solution to protect the palms of the hands for long training sessions. The shortened finger length additionally allows a natural grip. A high-quality finish and double stitches guarantee a maximum durability.

Characteristics:
Material: 90% polyester / 10% cotton
» Size: S/M/L/XL
» Colour: black/blue
» Will be delivered as a pair.

AB SLING

ITEM LP8164

  • LP8164-1

The LIVEPRO abdominal training loops are quickly and easily attached to the appropriate equipment by means of the oversized carabiner. A pull-up bar or similar can be used. The positioning of the arms in the comfortable loops provides a convenient hold and safety during the workout. They are used for classic leg lifting, which can be done in different variations. The material is extremely robust and durable.

Characteristics:
Material: durable nylon
Dimensions:
» Length: 60,0 cm
» Width: 15,0 cm
» Weight: 1.2 kg
» Loadable up to 300,0 kg.
» Colour: black
» Will be delivered as a pair.

BARBELL PAD

ITEM LP8093

  • LP8093-1

The LIVEPRO pad relieves the pressure on the shoulders and neck when exercising with the barbell, whether light or heavy weight. The pad is dimensionally stable and can be used for any standard barbell.

Characteristics:
Material: foam / polyester
» Dimensions:
» Length: 45,0 cm
»Diameter: 9,0 cm
» Weight: 500,0 g
» Colour: Black

ALUMINUM HANDLE GRIP

ITEM LP8285

  • LP8285-1

With the LIVEPRO resistance grips you can isolated train the forearm muscles and improve grip strength. These forearm muscles play a very important role in all kinds of exercises during the training. Just for pull-ups or barbell rowing, grip strength is an important factor in the correct execution of the exercise, so that the muscle to be trained is optimally used and the full strength potential can be called upon. Grip strength is not only important in competitive sports, but also in everyday life, for repetitive tasks such as carrying a shopping bag etc. They are available in 5 strengths.

Characteristics:
» Material: alloy steel/aluminium handles
» Dimensions:
» Length: 13,0 cm
» Width: 10,0 cm
» handle diameter: 1,8 cm
» Intensity: 28,0 / 45,0 / 64,0 / 91,0 / 127,0 kg
» Colour: violet/green/blue/grey/black

JUMP ROPE

ITEM LP8286

  • LP8286-1

Rope skipping strengthens the cardiovascular system, improves the endurance, physical condition and increases the general well-being. The plastic handles on both sides ensure comfortable handling during a longer workout. Rope skipping is very popular in boxing for warm-up or cross-fit in circuit training. The rope is extremely robust and durable thanks to the high-quality material.

Characteristics:
» Material: PP / TPR / PVC
» Dimensions:
» Length: 275,0 cm
» Rope diameter: 6,0 mm
» Weight: 210,0 g
» Colour: blue/black

JUMP ROPE

ITEM LP8283

  • LP8283-1

The Speed Rope with and without additional weights is a professional training tool for strengthening the cardiovascular system, promoting the endurance and condition in professional and popular sports. The rotating joints allow repetitions of up to 240 pieces per minute. The length of the rope is variable adjustable. The rope is ideal for warming up in martial arts or in the functional course. The rope is extremely robust and durable thanks to the high-quality material.

Characteristics:
» Material: steel rope with PU coating / metal handle
» Dimensions:
» Rope length: 300,0 cm
» Rope diameter: 3,0 mm
» Without additional weight: 185,0 g (green and blue)
» With additional weight: 300,0 g (silver and black)

WEIGHTED JUMP ROPE

ITEM LP8283H

  • LP8283H-1

The Speed Rope with and without additional weights is a professional training tool for strengthening the cardiovascular system, promoting the endurance and condition in professional and popular sports. The rotating joints allow repetitions of up to 240 pieces per minute. The length of the rope is variable adjustable. The rope is ideal for warming up in martial arts or in the functional course. The rope is extremely robust and durable thanks to the high-quality material.

Characteristics:
» Material: steel rope with PU coating / metal handle
» Dimensions:
» Rope length: 300,0 cm
» Rope diameter: 3,0 mm
» Without additional weight: 185,0 g (green and blue)
» With additional weight: 300,0 g (silver and black)

Desc Item Color Weight
Jump Rope LP8283 green-n 185,0 g
LP8283 blue-n 185,0 g
Weighted Jump Rope LP8283-H grey-n 300,0 g
LP8283-H black-n 300,0 g

WEIGHTED WRISTBAND

ITEM LP8287

  • LP8287-1

The LIVEPRO weighted bands are attached to the wrists and ankles as an additional weight. The goal is an improvement in strength and endurance of the muscles to be trained. An indispensable training device in martial arts, fitness and running training. The high-quality material also provides the possibility to use it in water for swimming training. They are extremely resistant and the velcro fastener provides a secure hold during the workout.

Characteristics:
» Material: rubber / FE
» Dimensions:
» Length: 21,0 cm
» Width: 6,0 cm
» Height: 2,0 cm
» Weight: 454,0 g per piece
» Colour: blue/black

BICEPS GRIP

ITEM LP8326

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 34.5×16×6cm
— Weight: 3.35kg

WEIGHTLIFTING BELT

ITEM LP8067

The leather training belt stabilizes the torso muscles during heavy dead lifts or squats. It supports a safe training without overstraining the important support muscles.

Characteristics:
» Material: leather
» Size: S, M, L, XL
» Colour: black

TRICEPS GRIP

ITEM LP8325

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 34.5×16×6cm
— Weight: 3.35kg

WIDE TRICEPS GRIP

ITEM LP8324

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 43×14.5×6cm
— Weight: 3.65kg

REVERSE GRIP

ITEM LP8322

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 30.5×10×16cm
— Weight: 2.4kg

V-GRIP

ITEM LP8323

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 27.5×12×17.5cm
— Weight: 2.65kg

V-BAR

ITEM LP8321

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 23.5×14.5×16.5cm
— Weight: 1.85kg

MID BAR

ITEM LP8329

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 53×13.5×10.5cm
— Weight: 2.35kg

MID GRIP

ITEM LP8327

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 56×12×17.5cm
— Weight: 3.1kg

WIDE GRIP

ITEM LP8328

Connect to other equipment and equipment for combined use.

— Material: PVC+Steel
— Size: 85×12×17.5cm
— Weight: 3.95kg

MULTI PURPOSE HANDLE

ITEM LP8192A

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38,0 cm.
» Colour: chrome / black

TRICEP V-BAR ROTATING

ITEM LP8192B

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for biceps and triceps training on the cable tower.
» Handle width approx. 44,0 cm.
» Colour: chrome / black

TRICEP ROPE

ITEM LP8192C

Characteristics:
» Material: Nylon
» Rotating joint and rubber ends.
» Suitable for biceps and triceps training on the cable tower.
» Dimensions:
» Length: approx. 70,0 cm
» Rope diameter: approx. 3,0 cm
» Colour: black

CABLE HANDLE

ITEM LP8192D

Characteristics:
» Solid steel with rotating joint.
» Pressed-on non-slip PU grips.
» Suitable for rowing and triceps push on the cable tower.
» Handle width approx. 38,0 cm.
» Colour: chrome / black

PRO LAT BAR

ITEM LP8192E

Characteristics:
» Solid steel with rotating joint.
» Pressed on non-slip PU-covers.
» 2 handle variations allow back training on the cable tower.
» Dimensions:
» Length: 67,0 cm.
» Handle width: 14,0 cm
» Colour: chrome / black

ANGLED BICEPS/TRICEPS BAR

ITEM LP8192F

Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» 2 handle variations allow versatile training exercises on the cable tower.
» length: 60,0 cm
» Colour: chrome / black

ROWING HANDLE

ITEM LP8192G

Characteristics:
» Solid steel with pressed-on non-slip PU-covers.
» The grip variant allows tight rowing on the cable tower.
» Handle width: 14,0 cm
» Colour: chrome / black

TRICEPS STRAIGHT BAR

ITEM LP8192H

Characteristics:
» Solid steel with rotating joint and pressed-on non-slip PU covers.
» The handle is suitable for biceps and triceps training on the cable tower.
» Length: 50,0 cm
» Colour: chrome / black

TRICEPS V-BAR

ITEM LP8192I

Characteristics:
» Solid steel with pressed-on non-slip PU-coatings.
» The handle is suitable for biceps and triceps training on the cable tower.
» Width: 35,0 cm
» Colour: chrome / black

STRAP HANDLE PRO

ITEM LP8192J

  • LP8192J-1
Characteristics:
» Break-proof plastic handle with foam cover.
» Multi-stitched nylon loop with metal ring.
» The one-hand grip is suitable for variable training on the cable tower.
» Handle width: 13,0 cm
» Loadable up to 60,0 kg
» Colour: black

WEIGHTLIFTING BELT

ITEM LP8067

This is a weightlifting belt made of heavy leather, ideal for those who require strength in a weightlifting belt. If you want to get into the traditional leather belt, this is a good choice for you.

-High-quality cowhide material
-Waist protector cotton design
-The inner side of the waistband is made of suede
-Double claw buckle design
-Size: M:105×11cm
L:130×13cm

POWER PULL BELT

ITEM LP8094

– Outer PU leather
– One size fits many body types
– Ergonomic design

WEIGHT BELT

ITEM LP8098

The PU material on the front of this belt is combined with the polyester on the inside. The EVA lining inside makes it comfortable and compact, making it a more comfortable belt on the market. The widest part of the belt is 19cm, which is consistent with your natural shape, lightweight and highly durable. The sturdy steel climbing buckle and high-strength knitting belt can make it have higher load capacity. You can connect relevant equipment to this knitting belt, and then you can easily carry out weight-bearing training.

-Material: EVA+PU+polyester
-Weight: 572g
-Size: 98×14-19cm

LIVEPRO RESISTANCE BAR

ITEM LP8400

Livepro Resistance Bar is a resistance workout gear used with resistance rope, which can be used for biceps and triceps exercise, standing bench press, push-ups. Both sides are disposed with steel hanging holes, one end is securely welded, the other end can rotate 360°smoothly, so that rope winding can be avoided. The inner core is made of high-grade steel, and the surface is applied with black glossy painting, which is durable, sturdy and resistant to rust. Two sections of high-density foam grips are disposed externally of steel pipes, which provide comfortable grip and safer workout.

– Made of sturdy and durable, high-grade steel material
– Movable hanging hole
– Designed with two-section threaded bar

RESISTANCE TUBE

ITEM LP8401

Livepro latex cloth sleeve resistance rope is suitable for fixed use at home, office and gym for full body exercise, which is a very effective training tool to enhance core strength, cardiovascular endurance and coordination. Internal high-quality latex tube, has high elasticity, high tensile strength, good rebound, and is not easy to deformation; Polyester fabric cover is wrapped externally, which is high strength, wear-resistant and anti-pull. Strong and durable aluminum climbing buckle is for connection and fixation, which is very durable.
Set contains four resistance values (10/20/30/40LBS), with a variety of combinations to meet different training needs.

– High-quality latex inner tube
– High-strength polyester fabric cover
– Aluminum climbing buckle

RESISTANCE TUBE

ITEM LP8405

  • LP8405-H
  • LP8405-M
  • LP8405-XH

The pull pipe which is made of latex elastic material has non-slip, textured handles at both ends. Yellow, blue, red and gray pipes are available, each with a length of 120cm, and the resistance force gradually increases with the stretching. The pull pipe is lightweight and portable, so you can exercise with it from place to place.

– High-grade latex material
– Cladded with a ring of TPR material
– Non-slip design
– Coupling design

HANDLE

ITEM LP8406

– High quality TPR material
– Wider and more comfortable handle
– Prismatic texture is designed on the handle

SUPER BAND

ITEM LP8410

Livepro Super Training Bands are thick and designed specifically for weight training and are very eective for both upper and lower body training for a variety of strength, speed, flexibility and rehabilitation exercises.
Super Training Bands are great for assisting with pull-ups, sit-ups, and improving lateral and forward speed with exercises such as jogging,behind-the-back drags, and lunges.

– Made of 100% natural latex
– Multifunctional training tools
– 5 dierent kinds of resistance

LOOP BANDS

ITEM LP8412

  • RESISTANCE TRAINING BAND
Livepro resistance rings are made from natural latex and have four different resistance levels.
Mini-training circles are great for both upper and lower body exercise and are suitable for side-stepping, leg stretching and shoulder stability training. They are also ideal for rehabilitation and strength training.
The resistance ring is very durable and can be stretched up to 3 times its length, making it easy to carry and can be used anywhere.

– 100% natural latex
– Multifunctional training tools
– Resistance: 10/20/30/40lb

RESISTANCE BAND

ITEM LP8415

  • ELASTIC BAND

The Livepro Fitness Elastic Band is a versatile piece of equipment that is ideal for rehabilitation, Pilates training and daily gymnastics, and can be used to exercise virtually every muscle and joint, building endurance and strength.

– High-quality TPE material
– Multifunctional training tools
– Resistance:5/10/15/20/25lb
– Compact and lightweight

FABRIC LOOP BAND

ITEM LP8414

  • KNITTED RESISTANCE TRAINING LOOP

Mini training loops are very effective for both upper and lower body training, perfect for lateral footwork, leg extensions and shoulder stabilization exercises, and ideal for rehabilitation and strength training.
The magic circles are durable and can be stretched up to three times their length, making them easy to carry and suitable for use anywhere.

– High-quality cotton material
– Multifunctional training tools
– 3 different types of resistance
– Compact and lightweight

DOUBLE RESISTANCE TRAINER

ITEM LP8424

After putting the equipment on, come to a resistance training, experience the whole-body resistance and impact brought by the equipment. Our products are thoroughly tested to exercise your whole body, and you can get a stronger core strength with the fight training.

– High-quality latex material
– Nylon fabric cover protected
– Easy to install, disassemble and adjust
– Elastic band has tension of 30LB, whose stretchable
– length can be three times of the original length, and can be stretched more than 10,000 times

EXPLOSIVE POWER TRAINER

ITEM LP8425

  • EXPLOSIVE POWER TRAINER

This product plays a very active role in strength training, combining variable resistance bodyweight training with instability through a quality resistance band. It meets a variety of athletic goals, shapes your core, exercises your legs, hips, and arms, and you can get a stronger core to support your entire body.

– Easy to install, disassemble and adjust
– Stretched more than 10,000 times
– High-quality latex material
– Nylon fabric cover protected

DOUBLE COMBAT TRAINER

ITEM LP8426

  • DOUBLE COMBAT TRAINER

It builds strength and endurance through training and lends two sets of rings to add resistance to each movement such as striking, connecting the four resistance bands of the wrist strap and foot sleeve to a fixed point, and then you start practicing.

– High-quality latex material
– Nylon fabric cover protected
– Easy to install, disassemble and adjust
– Stretched more than 10,000 times

STRETCH TRAINER

ITEM LP8427

  • STRETCH TRAINER

It trains your entire body with a combination of variable resistance bodyweight training and instability, builds core strength, shapes your legs, hips and you can get a stronger core to support your whole body.

– High-quality latex material
– Nylon fabric cover protected
– Easy to install, disassemble and adjust
– Stretched more than 10,000 times

PULL-UP ASSISTED BAND

ITEM LP8428

Easier to adjust the length and fixation, this pull-up band can also be easily installed and removed. The three inserted resistance elastic bands can be installed in less than 30 seconds, combining variable resistance bodyweight training with instability, and the non-slip foot stirrups can be used as a assisted band for pull-up training.

– Easier to adjust the length and fix
– High-quality latex material
– Nylon fabric cover protected
– Foam handle increases grip
– Elastic band has tension of 30LB, whose stretchable
– length can be three times of the original length, and
– can be stretched more than 10,000 times

BOUNCE TRAINER

ITEM LP8429

Bounce trainer is perfect for basketball, volleyball, soccer, tennis, running and other training, exercises the hip, calf, abdomen or limb strength, increases vertical jump, improves leg strength, explosive power, flexibility, balance and endurance.

– High-quality latex material
– Nylon fabric cover protected
– Easy to install, disassemble and adjust
– Stretched more than 10,000 times

CHEST EXPANDER

ITEM LP8430

This chest developer can be adjusted by the number of resistance tube to choose the appropriate resistance and provide progressive resistance in the traditional exercise, thereby enhancing the chest, shoulders, arms and front core strength. It is wrapped by nylon material externally, which increases the feel of the hand and also plays a role in protecting athletes and latex tube.

– Adjustable resistance
– High-quality latex material
– Waist support with multiple sports
– Foam grip
– Stretched more than 10,000 times

EXERCISE BAND

ITEM LP8407

-High-grade latex material
-Cladded with a ring of TPR material
-Non-slip design
-Coupling design

PRO ELBOW SLEEVE

ITEM LP8700

For the tennis player, golf lover, the weightlifter, or those with arthritis, tennis elbow or golfer’s elbow. Compression elbow sleeves help support & stabilize muscle movement & reduces impact forces. Works well for volleyball, football & baseball athletes or even those with chronic elbow pain. Our elbow sleeve provides warmth to the elbow joint that greatly helps in the recovery process translating to better performance.

-Material: Scr rubber+polyester
-Weight: S:84g M:88g L:91g
-Size: S M L

PRO KNEE SLEEVE

ITEM LP8701

Protecting your knees is of outmost importance for safeguarding your mobility, long-term. Made out of a perfect blend of SCR and high quality polyester, our knee sleeves are lightweight and durable, withstanding frequent washing and daily use.

-Material: Scr rubber+polyester
-Weight: S:108g M:112g L:118g XL:124g
-Size: S M L XL

LIFTING WRIST WRAPS

ITEM LP8702

Cotton weightlifting wrist wraps ensures compression, heat retention and blood flow. It is fully adjustable with attached thumb loop and easy to put on and take off. Go for bodybuilding, powerlifting, bench press, handstand, pushups, planks and more.

-Material: Cotton
-Weight: 45g/pair
-Size: 57.5×4×0.3cm

POWER STRAP

ITEM LP8703

Weight lifting straps for deadlifting have premium silicone padding that give you the security you need to lift heavier ensuring there are no chaffing, calluses.It fits any wrists and are designed to improve your grip strength without any slips.

-Material: Leather+Silicone
-Weight: 200g/pair
-Size: 20×21×2.2cm

POWER STRAP

ITEM LP8704

Our weight lifting straps transfers weight from palm to wrist, get a better grip on your bar. Soft and strong material will withstand longterm wear and tear, Provide complete protection for your palms.Design of anti slip belt gives a tight grip without any slips.

-Material: polyester
-Weight: 210g/pair
-Size: 18.5×25×2.1cm

MULTI FUNCTION HANDLES

ITEM LP8705

-Material: polyester
-Weight: 450g/pair
-Size: 48×14×4.6cm

FIT HOOK HANDLES

ITEM LP8706

-Material: polyester+rubber
-Weight: 450g/pair
-Size: 32×15×4cm

HANDLE

ITEM LP8707

-Material: polyester+ABS
-Weight: 500g/pair
-Size: 28.5×14×4.7cm

TRICEP ROPE

ITEM LP8708

-Material: polyester
-Weight: 400g
-Size: 70×6×6.5cm

DOOR ANCHOR

ITEM LP8709

-Material: polyester
-Weight: 75g
-Size: 40×5×3.5cm

MULTI POINT DOOR ANCHOR

ITEM LP8710

-Material: polyester
-Weight: 400g
-Size: 500×3.8×2.5cm

TRAINING ANKLE STRAPS

ITEM LP8711

-Material: Polyester+SBR+steel
-Weight: 226g/pair
-Size: 23.5×8×0.8cm

ANKLE CUFF

ITEM LP8712

-Material: polyester
-Weight: 85g
-Size: 35×16×2.5cm

BARBELL PAD

ITEM LP8713

-Material: PU+NBR
-Weight: 320g
-Size: 44×9×9cm

AB STRAPS HANDLE

ITEM LP8714

Material: polyester+PVC
Weight: 900g/pair
Size: 81×33×3.8cm

NECK HARNESS

ITEM LP8715

The neck harness for weight training is the perfect tool to attain a stronger, healthier neck. It is ergonomically designed to make it easy to wear. The neck and head harness is also adjustable to get a snug fit.This neck exercise device is made of breathable polyester fiber and steel rings, which are resistant to wear and tear.

-Material: polyester+steel
-Weight: 720g
-Size: 26×7×7cm
-Chain length: 88cm

TRAINING BELT

ITEM LP8716

This is a training belt with steel chains that can meet your requirements for weight during training. Durable material and soft back support fit your waist and provide adequate support.

-Material: polyester+steel
-Weight: 1.12kg
-Size: 80×15×1cm
-Chain length: 93cm

WEIGHTLIFTING BELT

ITEM LP8717

The Livepro weightlifting belt provides a wider and more comfortable back area that perfectly fits the waist. Stabilize athletes’ core strength, reduce back pressure, and increase protection. Provides better support and stability for the waist, allowing you to focus more on exercise.

-Material: polyester+EVA
-Weight: 420g
-Size:
S:75×18×2cm
M:86×18×2cm
L:95×18×2cm

SWEAT WAIST TRIMMER

ITEM LP8718

-Material: OK Fabric+SBR
-Weight: 300g
-Size: 125×19.5×0.5cm

Pro elbow sleeve

ITEM LP8069

Size S/M/ L
Material Cover: polyester

Inside: SCR

Pro knee sleeve

ITEM LP8079

Size S/ M/ L/XL
Material Cover: polyester

Inside: SCR

Tricep rope

ITEM LP8720

Weight 725g
Material Rope: nylon

Head: PU,Iron

Size Length: 700mm

5 PAIRS DUMBBELL RACK

ITEM LP8902

— Double-layer design, can store 5 pairs of dumbbells
— The arc-shaped placement layer design makes the storage weight larger
— Designed for dumbbell storage

— Size: 130Lx84Wx83H(cm)
— Assembly required

10 PAIRS DUMBBELL RACK

ITEM LP8901

— Double-layer design, can store 10 pairs of dumbbells
— The arc-shaped placement layer design makes the storage weight larger
— Designed for dumbbell storage

— Size: 245Lx84Wx83H(cm)
— Assembly required

15 PAIRS DUMBBELL RACK

ITEM LP8903

— 3-layer design, can store 15 pairs of dumbbells
— The arc-shaped placement layer design makes the storage weight larger
— Designed for dumbbell storage

— Size: 245Lx104Wx99H(cm)
— Assembly required

DUMBBELL TREE

ITEM LP8860

  • LP8860-1

This cylindrical vertical dumbbell tree is the ideal dumbbell storage solution for gyms, whether you are in a commercial health club or home gym, to keep your free strength area organized. The metal frame with a matte black finish looks very textured and it combines an aesthetically pleasing design with high-quality materials for an overall aesthetic look. The wide base provides extra stability.

— With 2mm thick pipe, with seamless welding technology
— Black frosting sprayed
— 4 anti-slip bottom brace on the base
— Size: 49L×49W×132H(cm)
— Weight:35kg
— Assembly required

2 TIER DUMBBELL RACK

ITEM LP8898

Used to store dumbbells.

— Double-layer design, can store hexagonal or square dumbbells
— Made of pure steel, strong and stable

— Size: 200Lx69Wx85.5H(cm)
— Assembly required

2 TIER KETTLEBELL RACK

ITEM LP8905

The kettlebell frame is made of Q195 steel, strong and stable. When picking or placing the kettlebell, a stable non-slip tray can fix the kettlebell in place to prevent it from falling. It can ensure that you can quickly store various dumbbells and kettlebells after strength training for convenient storage.

– Size: 148.5L×66W×82.3H(cm)
– Assembly required

3 TIER STORAGE RACK

ITEM LP8906

  • 3 TIER STORAGE RACK

The metal frame and the black matte surface look very textured.It combines beautiful design and high-quality materials.The anti-fall design at the edge makes the overall beautiful and magnifi-cent.The wide support feet provide extra stability, and the bottom has rubber feet to protect the floor from scratches.

– Size: 200L×66W×82.3H(cm)
– Assembly required

5 BARBELL RACK

ITEM LP8852

OLYMPIC BAR HOLDER

This 5 barbell rack is the ideal Olympics bar storage solution for gyms, whether you are in a commercial health club or a home gym. The metal frame with a matte black finish looks very textured and it combines an aesthetically pleasing design with high-quality materials for an overall aesthetic look. Wide support provides additional stability with rubber legs at the bottom to protect the floor from scratches.

— With pipe being 2mm thick with seamless welding technology
— Black frosting sprayed
— Protect the ground and be anti-slip
— Used for Olympics bar
— It covers a small area and optimally uses floor space

— Size: 85L×70.5W×131H(cm)
— Weight: 34.5kg
— Assembly required

VERTICAL PLATE AND BAR TREE

ITEM LP8851

OLYMPIC PLATE TREE AND BAR RACK

Olympic peak bell piece and weightlifting pole frame are the ideal bell piece and Olympic pole storage solutions for gyms, whether you are a commercial fitness club or a home gym. The metal frame with black matte surface is very textured, and the overall appearance is beautiful and atmospheric. Wide support for extra stability, with rubber feet at the bottom to protect the floor from scratches.

—3mm thick pipe, seamless welding technology, stable and durable
—Black frosted spray coating increases corrosion resistance and is not easy to rust
—The bell piece storage rod is hard chrome plated, smooth and not easy to rust
—The leather ring at the connection between the cross bar and the main bar effectively protects the bell blade from scratching
—The rubber support foot of the base provides effective protection

—Pin size: 100×50×2mm
—Rube thickness: 2mm
—Diameter of bar spigot tube: 60mm
—Diameter of bell piece hanging rod: 48mm
—Total length of bell piece hanging rod: 65cm
—Product size: 68L×66.5W×131H(cm)
—Weight: 24kg
—Assembly required

9 BAR HOLDER

ITEM LP8874

9 OLYMPIC BAR FLOOR STAND

This 9 bar holder is the solution for storing the Olympics bars in the gym. Because the Olympics bars are round and roll easily on the floor, which is the ideal solution to keep the gym floor neat and orderly and the safety of Olympics bars. 6.5mm thick metal steel frame with black matte finish looks very quality. The stand is designed with nine 51mm inner diameter Olympics bars jacks, which makes it easy to store the rod vertically and safely.

–With 6.5mm thick pipe, with seamless welding technology
–Black frosting sprayed
–Vertical storage is designed, covering a small area
–Protect the ground and be anti-slip

–Size: 44L×44W×16.5H(cm)
–Weight:21kg

10 BARBELL RACK

ITEM LP8853

BARBELL RACK

This barbell rack is the ideal barbell storage solution for gyms, whether you are in a commercial health club or a home gym. The metal frame with a matte black finish looks very textured and it combines an aesthetically pleasing design with high-quality materials for an overall aesthetic look. Wide support leg provides additional stability with rubber legs at the bottom to protect the floor from scratches.

— With 2mm thick pipe, with seamless welding technology
— Black frosting sprayed
— Protect the ground and be anti-slip
— Used to store up to 10 barbells

— Size: 83L×85W×125H(cm)
— Weight:56.5kg
— Assembly required

10 BARBELL RACK

ITEM LP8904

BARBELL RACK

The black matte surface on the metal frame looks very textured.Made of durable metal steel material, not easy to rust, beautiful and atmospheric.The perfect combination of triangle and arc can provide higher stability and load-bearing capacity. It is currently the perfect ring storage rack on the market.

— Size: 70.4Lx67.6Wx88.3H(cm)
— Assembly required

VERTICAL PLATE HANGER

ITEM LP8893

The 3 mandrels at equal intervals allow Olympia and Bumper weight plates to be stored on the wall to save space. The holder can be attached to the wall vertically, horizontally and diagonally as desired. The mounting height is freely selectable and thus offers the comfort of removing or loading the weight plates at a comfortable height. Rubber stoppers prevent the weight plates from coming into contact with the wall.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 120,0 cm
» Depth: 24.7 cm
» Height: 6.4 cm
» Weight: 9,0 kg
» Colour: black
» Wall mounting required.
» Delivery follows without weight plates.

HORIZONTAL PLATE RACK

ITEM LP8900

The metal frame and the black matte surface look very textured.It combines beautiful design and high-quality materials, and the overall beautiful atmosphere.The wide support feet provide extra stability.There are rubber feet on the bottom to protect the floor from scratches.

— Size:130.4L×38.6W×30.6H(cm)
— Assembly required

6 BAR GUN RACK

ITEM LP8812

This space-saving storage allows 6 commercial bars to be stored horizontally on the wall. The two elements can be mounted in any individual distance, so that even shorter barbells with small internal dimensions can bestored. A plastic track protects the surface coating and knurling of the bar.
Characteristics:
» Material: sheet steel with powder coating
vDimensions:
» Length: 98,0 cm
» Width: 12.5 cm
» Height: 5,0 cm
» Weight: 9.5 kg
» Colour: black
» Wall mounting required.
» Delivery follows without barbells.

PLATE AND BAR STORAGE SET

ITEM LP8894

This wall-mounted solution is space-saving and perfect for storing of Olympia weight plates and Olympia bars. The strategically located plate holders allow even bumper plates with identical outer diameters to be sorted away properly, which is ideal for cross boxing and weight lifting platforms positioned close to the wall. Three bars of different lengths can be stored in the tubes configured with plastic sleeves. The protective sleeves prevent the barbell coating from being scratched.

Characteristics:
» Material: square steel / steel tube with powder coating
» Dimensions:
» Width: 100,0 cm
» Depth: 40,0 cm
» Height: 181,0 cm
» Weight: 28,0 kg
» Colour: black
» Wall mounting necessary.
» Delivery follows without bars and weight plates.

VERTICAL BAR HANGER

ITEM LP8891

This space-saving storage allows 3 standard barbells to be stored upright at the wall. The two elements can be mounted at any individual distance, so that even shorter barbells with small internal dimensions can be stored. A plastic track protects the surface of the bar.

Characteristics:
» Material: sheet steel with powder coating
» Dimensions:
» Width: 32,0 cm
» Depth: 8.7 cm
» Height: 10.6 cm
» Weight: 6.5 kg
» Colour: black
» Wall mounting necessary.
» Delivery without bars.

10 MEDICINE BALL RACK

ITEM LP8806

The medicine ball stand holds 10 balls of any weight, 5 balls on each side.

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 37,5 cm
» Width: 56,0 cm
» Height: 141,0 cm
» Weigth: 18,0 kg
» Colour: black
» Assembly required.
» Delivery without balls

STORAGE RACK

ITEM LP8875

This universal rack can store kettlebells, fitness bags, vinyl hand weights, medicine balls, gym balls and fitness mats on the back. A true all-rounder. Ideal for small personal training studios or at home.

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 55,0 cm
» Width: 60,0 cm
» Height: 180,0 cm
» Weigth: 68,0 kg
» Colour: black.
» Assembly required
» Delivery follows without Equipment.

WALL BALL RACK

ITEM LP8811

The Wall Ball Rack holds 5 balls of any weight. The heavy-duty frame with inner support ensures that the Wall Balls are always evenly aligned for a visual effect. Storage brings order into the training room and everything gets its intended place.

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 66,0 cm
» Width: 76,0 cm
» Height: 173,0 cm
» Weigth: 20.5 kg
» Colour: Black
» Assembly required.
» Delivery without balls.

Studio storage system

ITEM LP8872-A

Made of Q235 steel.Purpose Yoga Accessories .Hangs Exercise Mats & Organize Yoga Blocks, Foam Rollers, Gym Mats quickly and easily.

TUBE
-Size: 56x120x700mm
-weight: 3.5KG

HOOK UP
-Size: 45x60x300mm
-weight: 0.5KG

BRACKETS-MEDBALL STORAGE

ITEM LP8892

BALL RACK
The comfortable wall solution for the storage of up to 8 Wall Balls / Slam Balls or medicine balls. Not suitable for gymnastics balls with a diameter greater than 40,0 cm. Also optionally available for 4 balls.

Characteristics:
» Material: Steel with powder coating
» Dimension:
» Length: 125,0 cm
» Width: 37,5 cm
» Height: 97,3 cm
» Weight: 48,0 kg
» Colour: Black
» Assembly required.
» Delivery follows without balls.

BALL RACK

ITEM LP8858

BALL RACK

The LIVEPRO gymnastic ball stand is the perfect storage for gymnastic balls from 45.0 – 75.0 cm in diameter. Up to 9 pieces can be stored properly. It can be set up independently of location, as required.

Characteristics:
Material: steel tube powder-coated
Dimensions:
» Length: 119.8 cm
» Width: 119.8 cm
» Height: 149.4 cm
» Weight: 22.8 kg
» Colour: black
» Assembly required.

POWER BAG RACK

ITEM LP8802

The Sand Bag rack holds 5 bags of any size. The heavy-duty frame with internal supports prevents the bags from sagging in the middle and helps maintain their shape. The lightweight frame makes transporting the frame easy. Storage brings order into the training room and everything gets its intended place.

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 86,5 cm
» Width: 59,0 cm
» Height: 145,5 cm
» Weigth: 20.5 kg
» Colour: black
» Assembly required.
» Delivery without bags.

Wall mounted bell storage rack

ITEM LP8872-C

Item LP8872-C
Size 1186*150*260mm
Frame structure Heavy duty

50*50*2.5mm

square tube

Frame

manufacturing

MIG welding

8.8 grade standard bolt

Barbell sleeve 4
Compatibility Suitable for

non inserted plates

Surface

treatment

Electrostatic

powder coating

Weight 6.1kg
Assemble Assembly required

Plates not included

Wall mounted plate storage rack

ITEM LP8872-D

Item LP8872-D
Size 215*87*86mm
Frame structure Heavy duty

50*50*2.5mm

square tube

Frame

manufacturing

MIG welding

8.8 grade standard bolt

Barbell sleeve
Compatibility 4 bars
Surface

treatment

Electrostatic

powder coating

Weight 1.6kg
Assemble Assembly required

Bars not included

Insert platehanger

ITEM LP8872-B

This wall holder provides optimal storage for the barbell of the LIVEPRO Smart Pump Set. It offers space for 15 barbells.

Characteristics:
» Material: steel with powder coating
» Dimensions:
» Length: 760,0 mm
» Depth: 290,0 mm
» Height: 120,0 mm
» Weight: 7,5 kg
» Colour: black
» Wall mounting required.

» Delivery follows without equipment.

Fitness mat hanger

ITEM LP8872-M

This wall holder provides storage for fitness mats with different hole spacing, for example from the manufacturers Airex, Pavigym and others. It offers space for 10 – 15 mats depending on the thickness of the mat.

Characteristics:
» Material: steel with powder coating
» Dimensions:
» Length: 700,0 mm
» Depth: 56,0 mm
» Height: 120,0 mm
» Mandrel length: 300,0 mm
» Weight: 2,5 kg
» Colour: black
» Wall mounting required.

» Delivery follows without equipment.

Insert plate hanger

ITEM LP8872-P

This wall holder provides optimal storage for the weight plates of the LIVEPRO Smart Pump Set. It offers space for 15 pieces.

Characteristics:
» Material: steel with powder coating
» Dimensions:
» Length: 1260,0 mm
» Depth: 290,0 mm
» Height: 120,0 mm
» Weight: 5,0 kg
» Colour: black
» Wall mounting required.

» Delivery follows without equipment.

STORAGE BOX

ITEM LP8862

Training areas quickly become disorganized if there is no suitable space for small training equipment such as boxing gloves, power bands and so on. The Training-Equipment Box on wheels solves the problem – it is a stylish storage solution with enough capacity for studios where functional training equipment is in great demand. If it gets in the way, it is simply pushed aside

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 130,0 cm
» Width: 70,0 cm
» Height: 81,0 cm
» Weight:43kg
» Assembly required.
» Colour: Black

STORAGE RACK

ITEM LP8897

  • COMBINATION SHELF

This is a versatile storage shelf that keeps your equipment neat and in tip-top shape when it is not in use. It is Made of sturdy steel for inherent strength. The black frosting sprayed adds feel and corrosion resistance. It is powerful enough to store 6 medicine balls, 3 yoga balls, hanging tools and foam shafts on the front and back.

– Size: 156.5L×76.6W×197.4H(cm)
– Weight: 73kg
– Assembly required
– Balls NOT included

STORAGE RACK

ITEM LP8875

This universal rack can store kettlebells, fitness bags, vinyl hand weights, medicine balls, gym balls and fitness mats on the back. A true all-rounder. Ideal for small personal training studios or at home.

Characteristics:
» Material: steel with powder coating
» Dimension:
» Length: 55,0 cm
» Width: 60,0 cm
» Height: 180,0 cm
» Weigth: 68,0 kg
» Colour: black.
» Assembly required
» Delivery follows without Equipment.

10 SETS BARBELL RACK

ITEM LP8801

The perfect storage possibility for the LIVEPRO rubber or polyurethane barbell set in the smallest space. The weight plates of 10 sets can be stored on 6 existing storage pins. The bars and locks are stored in the middle of the stand.

Characteristics:
» Material: steel with powder coating
» Dimensions:
» Length: 79,0 cm
» Width: 53,0 cm
» Height: 142,0 cm
» Weight: 34,0 kg
» Colour: black
» Assembly required.

» Delivery follows without equipment.

Multi-use hanger

ITEM LP8817

Multifunctional storage hangers are gym-ready accessories for storing belts, jump ropes, elastic bands and more. Although it is a simple accessory, it not only helps to clean up the training space, but also can effectively improve the efficiency of exercise and help athletes find the required equipment quickly and easily. The hangers are laser cut from 6mm thick Q195 gauge steel and include 10 parallel flat hooks with a 1cm upward tilt at the head of the hook to prevent equipment from rolling off for safer storage.

Mats rack

ITEM LP8814

  • LP8814-1

Mats with existing eyelets can be stored on the LIVEPRO mats rack. The hangers are compatible and changeable in width, which makes it possible to store any type of mat, but only uniformly and not differently. The trolley is mounted on 4 rollers and can be positioned anywhere in the room. 30 – 40 mats can be stored, depending on the thickness of the mats.

Characteristics:
Material: square steel powder-coated
Dimensions:
» Length: 74.0 cm
» Width: 74.0 cm
» Height: 207.0 cm
»Weight: 15.0 kg
» Colour: black
» Assembly required.
» Delivery follows without mats.

Mats hanger

ITEM LP8815

Made of high- quality steel with seamless welding technology
The black frosting is sprayed on the shelf layer to increase corrosion resistance, which is not easy to rust
Clever wall-mounted design

-Size: 69.5L×26W×6H(cm)
-Assembly required