Squat Rack

ITEM LP6239

In line with the principle of squat first, we have developed a simpler and purer “squat rack” series while retaining the iconic design of the E25. There are no redundant features and you don’t need much extension. However, it still has a strong combination. The lightweight volume and wheel accessories enhance the mobility of the space.

Squat & Pull Rack

ITEM LP6238

On the basis of the squatting frame, the height of the column is increased accordingly to increase the pull-up function, and the stability is enhanced, and the column is mounted by the barbell plate.

Redesigned single rail accessory, as small and compact as if it didn’t exist, it doesn’t get in the way of configuring in A Door, making solo training easier.

Half Rack

ITEM LP6209

LP8280

One of the earliest design classics of the E25 series, the smallest HR in the power rack.Highly sought after by all types of power players, we pressed to the extreme on the side while retaining stability thickness and ensure that it can add complex steel wire assemblies at a later stage.

Full Rack

ITEM LP6212

LP8280

One of the most classic frames designed in the E25 series, the smallest unit frame for comprehensive training in the power rack, FR. At the same time, it can meet the loading column of the barbell piece, and meet the internal and external double stations and double pull-up stations. In many large-scale custom projects, many builds are extended on a full-frame basis.

Split Dual Rack

ITEM LP6211

LP6211

SDR is a good choice if you want a low footprint, dual standing, and barbell plate mounting.
wo fundamentally symmetrical half-frames can be obtained by bisecting the single frame by connecting columns. It can meet the simultaneous installation of complex steel wires on both sides, allowing two stations outside the frame to be used at the same time. The C Door can still be equipped with barbell plates and other accessories.

Pure Rack

ITEM LP6210

LP6210

While retaining the internal and external dual-station training function, PR has extremely reduced footprint, which is highly sought after by many DIY players. The width and squat are both 1225mm and the unique square structure allows the spanning fitting to be used at both the front and side doors.

Full & Half Rack

ITEM LP6214

LP6214

A half-frame is extended on the rear side on the basis of the full frame, omitting and sharing a pair of barbell plate mounting columns. This combination is used in many large, mid-mounted custom projects, as at least two pure squat positions can be retained when adding wire or arm push functionality.

Double Full Rack

ITEM LP6215

LP6215

Based on the full frame, a full frame is extended on the rear side, which is the largest multi-functional power rack, which can meet the needs of four stations. It needs to be placed in the center, which is suitable for more large-scale custom projects of the club.

Split Full Rack

ITEM LP6213

LP6213

The SFR moves the C Door forward, protecting only the accessories slightly on the original configuration. It seems that the use of the inner frame has been sacrificed, but in fact, the inner and outer positions have been changed to double outer positions. At the same time, you get more storage space and a wider experience than SDR. This is especially evident when C Door expands the storage shelves.

Dual Stand Rig

ITEM LP6014

LP6014

The DSR is the most basic rig with 8 pull-up stations and 4 squat stations. 4 of these pullup stations are suitable for Muscle-up exercises.
Compared with the Rack system, the Rig cancels the cross-column laser number, but retains the column double-sided laser number, which is more in line with the use needs.

Dual Stand MultiHeight Rig

ITEM LP6023

LP6023

DMHR is a new way to build high positions in a basic rig with diagonal column components, with 4 pull-up and 4 squat stations and 2 ring stations.
The most recommended method for the new rig is still ground rig mounting, but we also offer ground beam assembly installation on sites where the ground does not meet the conditions (this method prohibits the installation of extension components on the shelf).

Tri Stand Rings Rig

ITEM LP6016

LP6016

The TSRR is expanded to three stations on top of the DSR and the structural beams of each frame are raised. By extending the boom, you get 9 pull-up stations (3 muscle-up stations) and 6 squat stations, along with 9 ring stations.

Tri Stand MultiHeight Rig

ITEM LP6024

LP6024

TMHR is a diverse mix of mixed heights, using all angled column sizes to create 4 different widths and heights. With 12 pull-up stations and 6 squat stations, there are also more than 3 ring stations.
The clever use of diagonal columns can create lateral slope climbing positions compared to horizontal columns, providing fun and a variety of difficulties.

Dual Station Wallmount Rig

ITEM LP6025

LP6025

DWR eliminated the Rig’s rear door, B Door, and attached the wall directly to the wall with custom conversion fittings and expansion screws through the side posts and side pull-up handles while the posts were secured. (The fact that the connector is a conversion attachment does not affect the future re-conversion of the assembly to the mounting rack.)
sub-use) for 5 pull-up stops (3 of which are muscle-up stops) and 2 squat stops.
Installation options are available with BB-rated multi-layer birch boards, on some wall materials, such as drywall or hollow bricks, direct use of expansion screws may not be sufficiently strong. Timber blocks can provide a larger fixed area and improve overall stability.

Monkey Rig

ITEM LP6017

LP6017

MR is a classic rig fusion design with climbing ladders and three standing positions for military or outdoor sports Combined, the rig has 12 pull-up stations (8 of which are muscle-ups) and 6 squat stations, as well as 2 possible ring-and-loop stations and an entire climbing line.

Tri Station Wallmount Rings Rig

ITEM LP6026

LP6026

The TWRR expands the DWR into three stations and raises the structural beams of each frame to obtain 8 pull-up stations (5 muscle-up stations) and 3 squat stations by extending the boom, as well as 6 ring stations.

Installation options are available with BB-rated multi-layer birch boards, on some wall materials, such as drywall or hollow bricks, direct use of expansion screws may not be sufficiently strong. Timber blocks can provide a larger fixed area and improve overall stability.

Roller J-Cup,Pair

ITEM LP6483

LP6483

The roller protection hook is a common accessory for powerlifting enthusiasts, and the protective space is not too large when the weight is taken off and landed, but it can be more convenient to find the centerline position of the pole under great load.

We’ve redesigned the funnel-style rollers on which the 28 to 50 mm diameter rods slide easily, and the rollers are constructed of extremely strong 301 stainless steel and 12.8 grade screws.

Simple J-Cup,Pair

ITEM LP6484

LP6484

Simple protective hook formed by one-piece bending, which has a larger leaning area than the market.

Full Safety Beams,Pair

ITEM LP6417

LP6417

Full-frame protective arms are essential in full-class power racks, using the traditional swivel mounting method while using magnetic pins to prevent rolling. The avoidance space on the front side can greatly increase the unnecessary time wasted when changing spaces within the shelf.

In combination with the E25 series shelves, the minimum ground clearance can be protected up to 310mm.

The newly upgraded sheet metal thickness has reached 10mm, and the signature stiffeners have been added, and the stainless steel pins have been welded with a special method to pass our crash limit test.

J-Hook,Pair

ITEM LP6415

LP6415

One of the must-have accessories. Huge load-bearing capacity is achieved with a sandwich-like construction. Also add your custom nameplate plate to decorate your J-hook.

Add a crushing hole with the advice of a UFC partner trainer to quickly start your workouts for static, activation, and more.

The same addition of our magnetic pin construction increases stability while preventing rollover, further improving reliability and safety.

Stainless steel pins with a special welded construction that provides protection and durability for repeated use between instruments.

Safety Straps,Pair

ITEM LP6457

LP6457

We have redesigned the structure of the harness to distinguish it from the traditional fixed or swivel mounting structure. Suction power up to 11000gs through ruthenium-vanadium magnets combined with 8.8-grade stainless steel pins. Now it can be unfolded/collapsed between shelves. Or make a one-time distance adjustment with a large span, switch between high protection and low security households, and coexist with safety and convenience.

Half Safety Arms,Pair

ITEM LP6416

LP6416

The 2-plug is the fastest and safest half-frame arm installation in the history of the “Multi-Jack Power Rack”. Thanks to the magnetic attraction of up to 11,000gs with ruthenium vanadium magnets, the process is now much more effortless.

Newly upgraded sheet metal thickness up to 10mm and signature stiffeners. The stainless steel pins are welded in a special way and pass our crash limit tests.

Stainless steel pins with a special welded construction that provides protection and durability for repeated use between instruments.

Used in conjunction with E25 series shelves, the minimum ground clearance can be protected up to 368mm.

Trolley Lever Arm

ITEM LP6460

LP6460

The trolley lever arm is one of the soul attachments of the combined power rack, and we’ve gone through incredibly long practice and research into this product. During this period, a number of patents have been accumulated. Comprehensive weight reduction, improved precision, smoother use of spring pin and brake structure, etc. We have focused on upgrading the handles, aluminum alloy handles, precision hanging rods, combined with “Steplock ™ ” technology, to make disassembly and assembly faster and easier.

Bulldog Pad

ITEM LP6418

LP6418

Two stainless steel magnetic pins and “peanut holes” fit together with 4 different angles to match the ergonomics of each workout, 90° , 70° , 50° , 30°.

Combined with upholstery, you can quickly create powerful aids for a variety of movements, such as rowing chest pads, bird neck pads, recline bench press backrests, one-hand support pads, and more.

Bull Horn Dip Bar

ITEM LP6426

LP6426

Foldable space-saving design.

Stainless steel magnetic pins for easy attachment/removal.

Roller Pad

ITEM LP6428

LP6428

One of the classic accessories of the power rack and an extremely useful one-leg training tool, we have improved the relationship between the threaded teeth and the nut to improve accuracy, and now it can be quickly locked and released with the power of the fingers.

Landmine

ITEM LP6429

LP6429

One of the classic accessories of the power rack, combined with the barbell bar, can create an infinite number of training movements suitable for a variety of sports, and we still use knob technology to increase the speed of positioning and changing positions.

At the same time, to protect the expensive barbell bar, a polyethylene lining and stainless steel rings were added.

Cablel Pully Column

ITEM LP6461/A

LP6461/A

Pulley wire is one of the most important heavy-duty components, for which we have made several patented designs and comprehensive upgrades to improve its performance and durability.

Eight pulleys, patented 45-degree arrangement, compress the number to the limit, while using boat-grade steel wire, 025 solid stainless steel guides, high-precision village sleeves and tight pulleys, together with a full set of aluminum alloy pulleys to improve the stability, precision and durability of the slide.

One of the secrets to our versatility is that, in addition to rearranging the pulleys, we also recast the steel sheets to compress the volume-to-weight ratio to the limit.

With the high stability of the “Precision Sliding” component, we have added a bungee cord function. This helps to avoid the “whip effect” that occurs in the wire during strong pulling, i.e. elasticity and inertia problems caused by uneven energy propagation.

Single Cablel Attachments

ITEM LP6461/B

LP6461/B

All components are installed independently, and can be installed on half-frame, single-frame and full-frame by changing the corresponding position and wire length according to different frame types.

SealSeat

ITEM LP6425

LP6425

As the name suggests, the sealSeat can be used to get a perfect seal pull training combination on the shelf, and the stainless steel magnetic pin can be quickly switched between devices to create unlimited training movements such as “steps”,”jumping boxes”, seated squats, and more.

Monkey Chin Bar

ITEM LP6423

LP6423

Double-rod bending and welding to create a strong, opposing 3-position pull-up structure that can be mounted without the need for a crossbar.

Redesigned bending angle for better ergonomics.

Batwing Bar

ITEM LP6419

LP6419

One-piece bend creates 4 athletic positions, forward, counter, back, and wide.

The new version of the upgraded pull-up rod has strict ergonomic requirements in terms of welding distance, installation distance and bending angle.

Chin Ballpin

ITEM LP6424

LP6424

It continues the precision and ease of use of knob technology, and at the same time, it has strong stability when used with spring pad nuts, which will not rotate, and can be installed with a single rod without taking up more holes.

Fat Chin Bar

ITEM LP6421

LP6421
Size Grip diameter Includes Weight Compatibility
2275*225*75mm Ø50mm Fat Chin Bar*1

8.8Screw group*4

13kg Ø26mm, 50mm PCD

1075mm ISW

1775*225*75mm Ø50mm Fat Chin Bar*1

8.8Screw group*4

11kg Ø26mm, 50mm PCD

1775mm ISW

1075*225*75mm Ø50mm Fat Chin Bar*1

8.8Screw group*4

8.7kg Ø26mm, 50mm PCD

2275mm ISW

Single Chin Bar

ITEM LP6420

LP6420
Size Grip diameter Includes Weight Compatibility
2275*225*75mm Ø32mm Single Chin Bar*1

8.8Screw group*4

14.8kg Ø26mm, 50mm PCD

1075mm ISW

1775*225*75mm Ø32mm Single Chin Bar*1

8.8Screw group*4

9kg Ø26mm

50mm PCD

1075*225*75mm Ø32mm Single Chin Bar*1

8.8Screw group*4

7.5kg Ø26mm, 50mm PCD

1075mm ISW

Stall Bars

ITEM LP6422

LP6422
Size Grip diameter Includes Weight Compatibility
075*45 Ø32mm Stall Bars*1

8.8Screw group*2

2.8kg Ø26mm

Cliff Hangers

ITEM LP6458

LP6458

The new pull-up fitting allows you to quickly set up 14 adjustable widths before pulling up and provides 280 degrees of flexible wrist range of motion.

Adjustable Chin Bar

ITEM LP6480

LP6480
Size Grip diameter Includes Weight Compatibility
075*45 Ø32mm Stall Bars*1

8.8Screw group*2

2.8kg Ø26mm

Triphasic Bars

ITEM LP6478

LP6478

By attaching a three-phase arm directly above the squat position, the squat trainer can be more engaged in the speed strengthening training of the centripetal force. It can also be combined with a pole to create a climbing frame with an incline of 25 degrees.

Trawler

ITEM LP6453

LP6453

At the same time, the suspension arm and the suspension buckle are combined to create the lifting point of the lifting ring or climbing rope, and at the same time, because the connecting plate reinforcement continues to use the consistent peanut hole design, it does not interfere with the side or cross column on any surface to maintain the level during installation.

Chin Ballpin

ITEM LP6479

LP6479

Hooks allow you to quickly and securely attach your lifting training accessories such as rings or climbing ropes.

Mag Pin

ITEM LP6427

LP6427
Length Grip diameter Material Weight Compatibility
150mm Ø25mm 304 stainless steel
Ruthenium vanadium
magnets
0.7kg Ø26mm
150mm Ø16mm 304 stainless steel
Ruthenium vanadium
magnets
0.35kg Ø17mm
130mm Ø10mm 304 stainless steel
Ruthenium vanadium
magnets
0.17kg Ø11mm

Band Peg

ITEM LP6451

LP6451
Length Grip diameter Material Weight Compatibility
600mm Ø25mm Black fine sand
304 stainless steel
1.1kg Ø26mm
250mm Ø25mm Black fine sand
304 stainless steel
0.9kg Ø26mm
260mm Ø25mm 304 stainless steel
Ruthenium vanadium
magnets
2.8kg Ø26mm

Plate Storage Shelf

ITEM LP6430

LP6430

The newly upgraded barbell plate storage plate has three storage modes and two installation methods, ball holder, bell plate plate, and flat plate, the above modes can be switched at any time, and the height change no longer needs to disassemble and assemble the shelf, but replace the accessories.

All shelves can be switched between double and single columns without changing the number of screws, and the single column can meet the avoidance or stepped layout of 50-100mm.

Complex Storage Shelf

ITEM LP6431

LP6431
Size Includes Material Weight Compatibility
2251*350*106mm

1751*350*106mm

1051*350*106mm

Complex

storage shelf*1

Q235 steel 9.6kg

15.5kg

19.7kg

Livepro

Plate Shelf

Stainless Steel Dividers4 Pack

ITEM LP6435

LP6435
Size Includes Material Weight Compatibility
L: 253mm

H: 237mm

Clapboard*4 304 stainless stee 2kg Livepro

Plate Shelf

2 To 1 Adapter

ITEM LP6471

LP6471
Size Includes Material Weight Compatibility
100*72.5*105mm Conversion

accessory*1

8.8Screw group*4

Q235 steel 1.3kg Livepro

Shelf

Dumbbell Storage Shelf

ITEM LP6433

LP6433

Minimalist style, strong weighing structure, more in line with the 15-degree inclined design of the lifting ergonomics.

All shelves can be switched between double and single columns without changing the number of screws. At the same time, the single column can meet the avoidance or stepped layout of 50-100mm.

Kettlebell Storage Shelf

ITEM LP6432

LP6432

One-piece bent 6mm ultra-wide flat plate provides more space for heavy and large equipment, and is equipped with a 6mm thick crash layer to make it easier to place heavy objects.

All shelves can be switched between double column and single column without changing the number of screws, and the single column can meet the avoidance or stepped layout of 50-100mm.

Dumbbell Saddle Storage Shelf

ITEM LP6434

LP6434

As the name suggests, a saddle-like dumbbell tray is added on the basis of the dumbbell board, and each dumbbell has its own exclusive weight identification position, which provides guidance for the storage of multiple use scenarios, reduces maintenance labor costs, ensures the storage aesthetics and provides better dumbbell placement stability.

Fixed Hook Storage

ITEM LP6446

LP6446

The fixed hook provides a wider range of stable and reliable hanging positions. The combination allows you to suspend many common training tools, such as elastic bands, yoga mats with holes, core trolleys, and more.

Knoblock Plate Pin

ITEM LP6436

LP6436

A fully assembled pendant bar based on Knoblock ™ knob technology, made of stainless steel and polyurethane.

With excellent service life and structural stability, switching between shelves is almost a breeze.

StepLock Grid

ITEM LP6442

LP6442

The bending holes up to 3mm thick have the capacity to withstand all heavy fittings. The same thickness as the shelf helps the hook to be shared between the shelf and the perforated slab.

Split Change Plate Utility Pin

ITEM LP6438

LP6438

Patented mounting system that quickly positions heavy-duty attachments in predetermined positions and locks with magnetic pins to create an easy, fast and secure training experience.

Adaptable digital window to help you quickly and confidently locate the desired position.

StepLock Hook

ITEM LP6448

LP6448

The step hook is our latest patented design that delivers durability, reliability, convenience and a seamless fit to the shelf.

We are applying these technologies to different product developments.

Seal Seat Storage

ITEM LP6441

LP6441

Seal board storage has always been a defining challenge for heavy equipment storage, and adding a dedicated storage accessory to each accessory is contrary to our “ALL In One” design philosophy.

Now you can split your seal board storage pins and use them for protective arms, barbell bars, pins, and more.

Swiss Ball Storage

ITEM LP6445

LP6445

We know that Swiss ball storage has always plagued various training scenarios, and now that combination training has become the norm, it is important to have a stable and reliable Swiss ball storage tray next to the power rack.

Bar Hanger

ITEM LP6465

LP6465

This is a storage accessory that can hang four bars. With digital science design, it can be mounted on single or double columns. It can also be seamlessly spliced to crosshairs or walls to create an exclusive barbell bar suspension area.

Bar Bucket

ITEM LP6439

LP6439

The newly upgraded single-rod bucket incorporates “pin positioning” technology. It can be installed with only one screw, and can be installed without distinguishing between horizontal columns and columns, which greatly improves the extensibility life of the accessories.

Anchor

ITEM LP6466

LP6466

The newly designed single-lever anchor combines “pin positioning” technology, and we have responded to individual gamers’ calls by upgrading to stainless steel locking screws to create a smooth and simple appearance.

Utility Basket

ITEM LP6447

LP6447

Fast is one of the concepts we designed to use power racks, and storage is one of our biggest rivals, now you can use the Multi-Purpose Blue to temporarily “discard” anything you don’t need or don’t need, cups, phones, alcohol, rags, etc.

Logo Plate Crossmembers

ITEM LP6405

LP6405

Nameplate transom is one of our signature assembly attachments for power racks, on which you can customize a creative nameplate with a single or even multi-layer structure, which we believe is as useful for training the spirit as it is for the actual function.

At the same time, the nameplate column is not only for appearance, but also for the thickened sheet metal parts to build a simple and reliable “inverted U-shaped” frame structure, creating a more transparent space in the frame.

GlideBeam™

ITEM LP6414

LP6414

The newly upgraded ground beam maintains the original rigidity and center while reducing the overall volume, and adds let hole treatment on both sides of the ground sheet metal, so that the height of the connecting sheet metal can be consistent with the side pillar during installation, and the characteristics of the protective arm can be used at a height of 35cm above the ground.

Linked sheet metal continues our design concept of high scalability, which can be installed laterally, reducing the height of the ground side columns and increasing lateral passability. It can also be installed in the landscape to enhance the stability of the frame.

BenchConnect Beam™

ITEM LP6485

LP6485

To complement our newly developed heavy-duty adjustable power stool, we’ve added attachments to the upgraded floor beams, so you can now keep the stool completely perpendicular to your frame and get great stability when you train with a stool frame within the frame.

Chin Bar Crossmembers

ITEM LP6406

LP6406

As with the function of nameplate columns, create an alternative to an “inverted U-shaped” frame structure, replacing the nameplate with horizontal bars as lateral supports while providing pull-up functionality.

It is worth mentioning that some solutions take advantage of the characteristics of the horizontal bar column to create a non-strict width but adjustable eye scheme.

Mega Bridge

ITEM LP6411

LP6411

Newly upgraded bridge frame with reduced angle of inclined columns and enhanced maneuverability for climbing sports.

The bridge is a pure aerial frame with almost no special parts, and the ribs of the middle 1075 fit with the bridge columns to align the holes outside the frame and can be reused within the frame, thanks to the strict implementation of the mathematical system of the E25 series. The connection method relies on a screw group with a diameter of 8.8 class M24, so it is possible to use a simple connection method such as a bridge column and has a high degree of reliability.

Front Foot Extension,Pair

ITEM LP6413

LP6413

Front foot extensions are designed to enhance stability for small frames up to half a frame, and can be used as a connecting accessory when building a weight bench power rack, and if you need to build bungee cord anchors or barrel bases outside of the frame, you can also use them to expand your design space outside the frame.

Incline Crossbar

ITEM LP6468

LP6468
Length 1075 (1100)/1775 (1100)
Includes Incline crossbar*1, 8.8 Screw set*4
Weight 14kg/17.8kg
Compatibility 75mm SQ Tube, Ø26mm, 50mm PCD

Incline Crossbar

ITEM LP6467

LP6467
Length 1075 (1100)/1775 (1100)
Includes Incline crossbar*1, 8.8 Screw set*4
Weight 14kg/17.8kg
Compatibility 75mm SQ Tube, Ø26mm, 50mm PCD

Numberd Holes Uproghts

ITEM LP6400

LP6400
Length 3600mm 3050mm 2700mm 2500mm 2300mm
Includes Incline crossbar*1, 8.8 Screw set*4
Weight 21.4kg 18.3kg 16.3kg 15.2kg 14kg
Compatibility 75mm SQ Tube, Ø26mm, 50mm PCD

Connecting Column

ITEM LP6403

LP6403
Length 2700mm 2500mm 2300mm
Includes Connecting column*1 8.8 Screw set*2
Weight 16kg 15kg 14kg
Compatibility 75mm SQ Tube, Ø26mm, 50mm PCD

Rack Uproghts

ITEM LP6402

LP6402
Length 3600mm 3050mm 2500mm 2000mm 600mm 1200mm 1000mm 800mm 600mm 400mm
Includes Rack uproghts*1
Weight 21.4kg 18.3kg 15.2kg
Compatibility 75mm SQ Tube, Ø26mm, 50mm PCD

Classic Crossmembers

ITEM LP6408

LP6408

Length

Weight Material Includes Compatibility

2775mm

21.1kg

Q235 steel

Classic

crossmembers *1

8.8 Screw set *4

75mm SQ Tube

Ø26mm

50mm PCD

2275mm

18.1kg

1775mm

15.5kg

1075mm 11.5kg

High Bridge

ITEM LP6409

LP6409

Length

Weight Material Includes Compatibility

2775mm

17.8kg

Q235 steel

High bridge *1

8.8 Screw set *4

75mm SQ Tube

Ø26mm

50mm PCD

2275mm

14kg

1775mm

16.6kg

1075mm 13kg

Rack Side Beam

ITEM LP6412

LP6412

Length

Weight Material Includes Compatibility

1775mm

31kg

Q235 steel

Rack side beam *1

8.8 Screw set *4

75mm SQ Tube

Ø26mm

50mm PCD

1625mm

29kg

1075mm

22.7kg

575mm

17.3kg

Numberd Holes Crossmembers

ITEM LP6404

LP6404

The digital column is our A Door column designed specifically for the power rack, with a milled digital hole compared to the classic column and the addition of the iconic branded sheet metal piece.

Black Electrocoating Package, 4 Pack

ITEM LP6455

LP6455
Size Surface Includes Weight Compatibility
M24x120 Black

electrophoresis

Screw*1

Nut*1

Gasket*2

Gasket springs*1

0.68kg 026mm
M24x130 Black

electrophoresis

Screw*1

Nut*1

Gasket*2

Gasket springs*1

0.71kg

Fischer FH II , 4 Pack

ITEM LP6456

LP6456
Size Surface Includes Weight Compatibility
M10 (M14) x120 Color zinc Screw*1 Ø16mm